diff options
author | Daniel Fuchs <software@sagacioussuricata.com> | 2022-10-25 01:13:30 +0000 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-11-13 22:36:06 +0100 |
commit | 794d1645b3d4e6735b4a749f39cfeaa05f60b101 (patch) | |
tree | 1a36663c2dbf9cd5d62015524db9a4eb1977d0c4 /target/linux/ramips/dts | |
parent | 0cfd15552e335528743f1fcc4961959126788bf5 (diff) | |
download | upstream-794d1645b3d4e6735b4a749f39cfeaa05f60b101.tar.gz upstream-794d1645b3d4e6735b4a749f39cfeaa05f60b101.tar.bz2 upstream-794d1645b3d4e6735b4a749f39cfeaa05f60b101.zip |
ramips: add support for Amped Wireless B1200EX
This device is almost identical to the already supported Edimax
EW-7476RP5, the only differences are:
- There is no mode selection slider switch on this device
- The two wireless LEDs are green instead of blue
- Model name in the CSYS header is RN10
Additional changes:
- Moved WiFi LEDs and the slider switch to the individual dt files
- Added ieee80211-freq-limit to the mt7612e radio to properly disable
2.4GHz band on this radio
Device specifications:
SoC: MediaTek MT7620a @ 580MHz
RAM: 64M (Winbond W9751G6KB-25)
FLASH: 8MB (Macronix)
WiFi: SoC-integrated: MediaTek MT7620a bgn
WiFi: MediaTek MT7612EN nac
GbE: 1x (RTL8211E)
BTN: WPS/RESET
LED: - WiFi 5G (green)
- WiFi 2.4G (green)
- Signal Strength (green)
- Power (green)
- WPS (green)
- LAN (green)
UART: UART is present as Pads with throughholes on the PCB. They are
located next to the WPS button
3.3V - RX - GND - TX / 57600-8N1
3.3V is the square pad
Installation:
Upload the sysupgrade image via the default web interface
Signed-off-by: Daniel Fuchs <software@sagacioussuricata.com>
Diffstat (limited to 'target/linux/ramips/dts')
4 files changed, 103 insertions, 32 deletions
diff --git a/target/linux/ramips/dts/mt7620a_ampedwireless_b1200ex.dts b/target/linux/ramips/dts/mt7620a_ampedwireless_b1200ex.dts new file mode 100644 index 0000000000..10871140e9 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_ampedwireless_b1200ex.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a_edimax_ew-747x.dtsi" + +/ { + compatible = "ampedwireless,b1200ex", "ralink,mt7620a-soc"; + model = "Amped Wireless B1200EX"; + + leds { + wlan2g { + label = "green:wlan2g"; + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + + wlan5g { + label = "green:wlan5g"; + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + signal_strength { + label = "green:signal_strength"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts b/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts index ebab7e4089..e4fc2d03e4 100644 --- a/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts @@ -5,4 +5,39 @@ / { compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc"; model = "Edimax EW-7476RPC"; + + keys { + switch_high { + label = "switch high"; + gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + }; + + switch_off { + label = "switch off"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <BTN_1>; + linux,input-type = <EV_SW>; + }; + }; + + leds { + wlan2g { + label = "blue:wlan2g"; + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + + wlan5g { + label = "blue:wlan5g"; + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + crossband { + label = "green:crossband"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts b/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts index a0fa2e3da8..97da9cda4b 100644 --- a/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts @@ -5,4 +5,39 @@ / { compatible = "edimax,ew-7478ac", "ralink,mt7620a-soc"; model = "Edimax EW-7478AC"; + + keys { + switch_high { + label = "switch high"; + gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + }; + + switch_off { + label = "switch off"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <BTN_1>; + linux,input-type = <EV_SW>; + }; + }; + + leds { + wlan2g { + label = "blue:wlan2g"; + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + + wlan5g { + label = "blue:wlan5g"; + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + crossband { + label = "green:crossband"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi b/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi index 1d77c27f5f..abac0208d0 100644 --- a/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi @@ -24,20 +24,6 @@ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; - - switch_high { - label = "switch high"; - gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - }; - - switch_off { - label = "switch off"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - linux,input-type = <EV_SW>; - }; }; leds { @@ -53,27 +39,10 @@ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; }; - wlan2g { - label = "blue:wlan2g"; - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1radio"; - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0radio"; - }; - wps { label = "green:wps"; gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; }; - - crossband { - label = "green:crossband"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - }; }; }; @@ -206,6 +175,8 @@ &wmac { ralink,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; }; &pcie { @@ -216,7 +187,10 @@ wifi@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; - mediatek,2ghz = <0>; + ieee80211-freq-limit = <5000000 6000000>; + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <2>; }; }; |