diff options
| author | Milan Krstic <milan.krstic@gmail.com> | 2023-09-29 15:26:47 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-10-29 18:51:11 +0100 |
| commit | 17465fc77ec0dbe40310548ee16352b09e2712aa (patch) | |
| tree | 239f66efc4b9d937b528d4c78cf16ba1494a396b /target/linux/ramips/dts | |
| parent | da52c6f50e6088d543ce9d0287b30817bdafaa8e (diff) | |
| download | upstream-17465fc77ec0dbe40310548ee16352b09e2712aa.tar.gz upstream-17465fc77ec0dbe40310548ee16352b09e2712aa.tar.bz2 upstream-17465fc77ec0dbe40310548ee16352b09e2712aa.zip | |
ramips: add support for ZyXEL LTE5398-M904
ZyXEL LTE5398-M904 is a dual band 802.11ac indoor LTE/3G CPE with an FXS
port.
Specifications:
* SoC: Mediatek MT7621AT
* RAM: 256 MB
* Flash: 128MB NAND (MX30LF1G18AC)
* WiFi: MediaTek MT7603 2.4G + MediaTek MT7615 5G
* Switch: 2 GbE ports MT7530
* LTE/3G: Quectel EG18-EA LTE-A Cat. 18
* SIM: 1 micro-SIM card slot
* Buttons: Reset, WPS
* LEDs: power (G/B), internet (G), LTE (R/G/Orange), WiFi (G), voice (G)
* VoIP: 1 FXS RJ11 port
* Power: 12V, 2A
UART serial console:
57600,8N1
Unpopulated header J5:
[o] GND
[ ] key - no pin
[o] RX
[o] TX
[o] 3.3V Vcc
Installation:
* Log in as root using ssh to 192.168.1.1
* scp OpenWrt initramfs-recovery.bin image to root@192.168.1.1:/tmp/
* Prepare bootloader config by running:
nvram setro uboot DebugFlag 0x1
nvram setro uboot CheckBypass 0
nvram commit
* Run "mtd_write -w write /tmp/initramfs-recovery.bin Kernel" and reboot
* Wait for OpenWrt to boot and ssh to root@192.168.1.1
* Run sysupgrade with OpenWrt squashfs-sysupgrade.bin image
For mode details about flashing see:
2449a63208 (ramips: mt7621: Add support for ZyXEL NR7101, 2021-04-19)
Unsupported:
* FXS/Voice
Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts')
| -rw-r--r-- | target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts b/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts new file mode 100644 index 00000000000..d6f00d9edc8 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "zyxel,lte5398-m904", "mediatek,mt7621-soc"; + model = "ZyXEL LTE5398-M904"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_green { + label = "green:power"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + power_blue { + label = "blue:power"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbport"; + trigger-sources = <&ehci_port2>; + }; + + internet { + label = "green:internet"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + }; + + wifi { + label = "green:wifi"; + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + voice { + label = "green:voice"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + }; + + lte_green { + label = "green:lte"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + lte_orange { + label = "orange:lte"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + lte_red { + label = "red:lte"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + lte_power { + gpio-export,name = "lte_power"; + gpio-export,output = <0>; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + + usb_power { + gpio-export,name = "usb_power"; + gpio-export,output = <1>; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "Config"; + reg = <0x80000 0x80000>; + }; + + factory: partition@100000 { + compatible = "nvmem-cells"; + label = "Factory"; + reg = <0x100000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x400>; + }; + + eeprom_factory_8000: eeprom@8000 { + reg = <0x8000 0x4da8>; + }; + + macaddr_factory_fe6e: macaddr@fe6e { + reg = <0xfe6e 0x6>; + }; + }; + + partition@140000 { + label = "Kernel"; + reg = <0x140000 0x1ec0000>; + }; + + partition@540000 { + label = "ubi"; + reg = <0x540000 0x1ac0000>; + }; + + partition@2140000 { + label = "Kernel2"; + reg = <0x2140000 0x1ec0000>; + }; + + partition@4000000 { + label = "wwan"; + reg = <0x4000000 0x100000>; + }; + + partition@4100000 { + label = "data"; + reg = <0x4100000 0x1000000>; + }; + + partition@5100000 { + label = "rom-d"; + reg = <0x5100000 0x100000>; + read-only; + }; + + partition@5200000 { + label = "reserve"; + reg = <0x5200000 0x80000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&state_default { + gpio { + groups = "i2c", "rgmii2", "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_fe6e>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan1"; + }; + port@2 { + status = "okay"; + label = "lan2"; + }; + }; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_8000>; + nvmem-cell-names = "eeprom"; + }; +}; |
