ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 55 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/mt7620a_phicomm_psg1218a.dts b/target/linux/ramips/dts/mt7620a_phicomm_psg1218a.dts
new file mode 100644
index 0000000000..dbde2a8047
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_phicomm_psg1218a.dts
@@ -0,0 +1,55 @@
+/dts-v1/;
+
+#include "mt7620a_phicomm_psg1218.dtsi"
+
+/ {
+	compatible = "phicomm,psg1218a", "phicomm,psg1218", "ralink,mt7620a-soc";
+	model = "Phicomm PSG1218 rev.A";
+
+	aliases {
+		led-boot = &led_blue;
+		led-failsafe = &led_blue;
+		led-running = &led_blue;
+		led-upgrade = &led_blue;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led_blue: blue {
+			label = "psg1218a:blue:status";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		yellow {
+			label = "psg1218a:yellow:status";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			label = "psg1218a:red:status";
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+	mtd-mac-address = <&factory 0x28>;
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pa_pins>;
+};