diff options
author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-09 12:31:57 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-11 01:41:43 +0200 |
commit | fbb46b7bcc24e5ef2581930e2a9b3996e4381f97 (patch) | |
tree | 337a7b4b0ab2255ffd0c27bfc3d9b0a48e074bb4 /target/linux/ramips/dts/mt7620a_netgear_ex3x00_ex61xx.dtsi | |
parent | 69f6fc7b15875e7657cd56ef69731cde41f677a0 (diff) | |
download | upstream-fbb46b7bcc24e5ef2581930e2a9b3996e4381f97.tar.gz upstream-fbb46b7bcc24e5ef2581930e2a9b3996e4381f97.tar.bz2 upstream-fbb46b7bcc24e5ef2581930e2a9b3996e4381f97.zip |
ramips: add support for Netgear EX6120
Specifications:
* SoC: MT7620A
* CPU: 580 MHz
* RAM: 64 MB DDR
* Flash: 8MB NOR SPI flash
* WiFi: MT7612E (5GHz) and builtin MT7620A (2.4GHz)
* LAN: 1x100M
The device is identical to the EX6130 except
for the mains socket and the hardware ID.
Installation:
The -factory images can be flashed from the
device's web interface or via nmrpflash.
Notes:
MAC addresses were set up based on the EX6130 setup.
This is based on prior work of Adam Serbinski and Mathias Buchwald.
Tested by Mathias Buchwald.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/dts/mt7620a_netgear_ex3x00_ex61xx.dtsi')
-rw-r--r-- | target/linux/ramips/dts/mt7620a_netgear_ex3x00_ex61xx.dtsi | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3x00_ex61xx.dtsi b/target/linux/ramips/dts/mt7620a_netgear_ex3x00_ex61xx.dtsi new file mode 100644 index 0000000000..1f255c76b2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_ex3x00_ex61xx.dtsi @@ -0,0 +1,113 @@ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "mt7620a.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,57600"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x790000>; + }; + + partition@7e0000 { + label = "board_data"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + partition@7f0000 { + label = "nvram"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; + +&state_default { + default { + groups = "i2c", "rgmii2", "spi refclk"; + function = "gpio"; + }; +}; |