diff options
| author | Makoto Takeuchi <mak0@lxsys.co.uk> | 2017-05-24 16:37:24 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-06-12 21:07:31 +0200 |
| commit | ca27b3d370353ff57719718a1964c6b4f10b11a4 (patch) | |
| tree | f5b40d8d2a2f5b3745fb55f20b27f086b3b95dab /target/linux/ramips/dts/ZBT-APE522II.dts | |
| parent | c2f052acaeb480e89d3ce39c47f49ad16b3464ac (diff) | |
| download | upstream-ca27b3d370353ff57719718a1964c6b4f10b11a4.tar.gz upstream-ca27b3d370353ff57719718a1964c6b4f10b11a4.tar.bz2 upstream-ca27b3d370353ff57719718a1964c6b4f10b11a4.zip | |
kirkwood: add support for Cisco ON100
The Cisco ON100 device is a Kirkwood based router:
SoC: Marvell 88F6282 1600Mhz
SDRAM memory: 512MB DDR3 1333Mhz
Gigabit ethernet: 2x Marvell 88E1310 (over RGMII)
Flash memory: 512MB
2 bi-colour status LEDs (green/red)
1 Reset button
1 USB 2.0 port (on back)
1 SDIO slot (on back)
This commit adds a target profile of "Cisco Systems ON100" under the target
system "Marvell Kirkwood".
Flashing can be performed over tftp, once "dhcp" has been issued:
tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin
nand erase 0x0c0000 ${filesize}
nand write ${loadaddr} 0x0c0000 ${filesize}
Once flashed, set environment variables to boot:
setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs
\; bootm
saveenv
Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
Diffstat (limited to 'target/linux/ramips/dts/ZBT-APE522II.dts')
0 files changed, 0 insertions, 0 deletions