ramips: fix Zbtlink ZBT-WR8305RT board name

There is another Zbtlink board (ZBT-WA05) supported in ramips target, so use the same naming scheme for ZBT-WR8305RT board and its dts file.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46614

1 files changed, 0 insertions, 117 deletions

diff --git a/target/linux/ramips/dts/WR8305RT.dts b/target/linux/ramips/dts/WR8305RT.dts
deleted file mode 100644
index 1f3c345bed..0000000000
--- a/target/linux/ramips/dts/WR8305RT.dts
+++ /dev/null
@@ -1,117 +0,0 @@
-/dts-v1/;
-
-/include/ "mt7620n.dtsi"
-
-/ {
-	compatible = "wr8305rt", "ralink,mt7620n-soc";
-	model = "ZBT WR8305RT";
-
-	palmbus@10000000 {
-		gpio1: gpio@638 {
-			status = "okay";
-		};
-
-		gpio3: gpio@688 {
-			status = "okay";
-		};
-
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l6405d";
-				reg = <0 0>;
-				linux,modalias = "m25p80", "en25q64";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				factory: partition@40000 {
-					label = "factory";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0x7b0000>;
-				};
-			};
-		};
-	};
-
-	ehci@101c0000 {
-		status = "okay";
-	};
-
-	ohci@101c1000 {
-		status = "okay";
-	};
-
-	ethernet@10100000 {
-		mtd-mac-address = <&factory 0x4>;
-		ralink,port-map = "llllw";
-	};
-
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			ephy {
-				ralink,group = "ephy";
-				ralink,function = "ephy";
-			};
-
-			default {
-				ralink,group = "i2c", "uartf", "spi refclk", "wled";
-				ralink,function = "gpio";
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		sys {
-			label = "wr8305rt:sys";
-			gpios = <&gpio1 14 1>;
-		};
-
-		lan {
-			label = "wr8305rt:usb";
-			gpios = <&gpio1 15 1>;
-		};
-
-		wifi {
-			label = "wr8305rt:wifi";
-			gpios = <&gpio3 0 1>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 1>;
-			linux,code = <0x198>;
-		};
-	};
-};