ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 157 deletions

diff --git a/target/linux/ramips/dts/WHR-300HP2.dts b/target/linux/ramips/dts/WHR-300HP2.dts
deleted file mode 100644
index 8a79d6ab05..0000000000
--- a/target/linux/ramips/dts/WHR-300HP2.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
-	model = "Buffalo WHR-300HP2";
-
-	aliases {
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_green;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "whr-300hp2:red:power";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi {
-			label = "whr-300hp2:green:wifi";
-			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power_green: power2 {
-			label = "whr-300hp2:green:power";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi2 {
-			label = "whr-300hp2:orange:wifi";
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-
-		internet {
-			label = "whr-300hp2:green:internet";
-			gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
-		};
-
-		router {
-			label = "whr-300hp2:green:router";
-			gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-		};
-
-		router2 {
-			label = "whr-300hp2:orange:router";
-			gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		aoss {
-			label = "aoss";
-			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		ap {
-			label = "ap";
-			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-
-		bridge {
-			label = "bridge";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			linux,input-type = <EV_SW>;
-		};
-	};
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0x7b0000>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&ethernet {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ephy_pins>;
-	mediatek,portmap = "llllw";
-};
-
-&gsw {
-	mediatek,port4 = "ephy";
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pa_pins>;
-};