ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 202 deletions

diff --git a/target/linux/ramips/dts/EW-7478APC.dts b/target/linux/ramips/dts/EW-7478APC.dts
deleted file mode 100644
index bd1768b34e..0000000000
--- a/target/linux/ramips/dts/EW-7478APC.dts
+++ /dev/null
@@ -1,202 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "edimax,ew-7478apc", "ralink,mt7620a-soc";
-	model = "Edimax EW-7478APC";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset_wps {
-			label = "reset_wps";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "ew-7478apc:white:power";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-		};
-
-		internet {
-			label = "ew-7478apc:blue:internet";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan {
-			label = "ew-7478apc:blue:wlan";
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-
-		usb {
-			label = "ew-7478apc:blue:usb";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-	};
-};
-
-&gpio2 {
-	status = "okay";
-
-	enable_usb_power {
-		gpio-hog;
-		line-name = "enable USB power";
-		gpios = <5 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				label = "cimage";
-				reg = <0x50000 0x20000>;
-				read-only;
-			};
-
-			partition@70000 {
-				compatible = "edimax,uimage";
-				label = "firmware";
-				reg = <0x00070000 0x00790000>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "uartf", "nd_sd";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	mtd-mac-address = <&factory 0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-	mediatek,portmap = "wllll";
-
-	port@5 {
-		status = "okay";
-		mediatek,fixed-link = <1000 1 1 1>;
-		phy-mode = "rgmii";
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			phy-mode = "rgmii";
-		};
-
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			phy-mode = "rgmii";
-		};
-
-		phy2: ethernet-phy@2 {
-			reg = <2>;
-			phy-mode = "rgmii";
-		};
-
-		phy3: ethernet-phy@3 {
-			reg = <3>;
-			phy-mode = "rgmii";
-		};
-
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			phy-mode = "rgmii";
-		};
-
-		phy1f: ethernet-phy@1f {
-			reg = <0x1f>;
-			phy-mode = "rgmii";
-		};
-	};
-};
-
-&gsw {
-	mediatek,port4 = "gmac";
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	wifi@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x8000>;
-		mediatek,2ghz = <0>;
-	};
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};