aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorKip Porterfield <kip.porterfield@gmail.com>2019-02-03 13:54:18 -0500
committerChristian Lamparter <chunkeey@gmail.com>2019-03-02 13:04:45 +0100
commitf2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3 (patch)
treecc3f4fc38a629e19a0939adde82b30c6cdf9d849 /target/linux/ramips/base-files
parent6c558bae648ea8bca8fc8fcbee760a0cdc9ca9c9 (diff)
downloadupstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.tar.gz
upstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.tar.bz2
upstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.zip
ramips: add support for Belkin F9K1109v1
Device specification: - SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz - RAM: 64Mb - Flash: 8MB (SPI-NOR) - Ethernet: 10/100/1000 Mbps - WLAN Wireless 1: SoC-integrated : 2.4/5 GHz Wireless 2: 2.4 GHz RT3092L - LED: 2x USB, WAN, LAN - Key: WPS, reset - Serial: 4-pin header, (57600,8,N,1), 3.3V TTL, GND, RX, TX, V - J12 marking on board - USB ports: 2 x USB 2.0 Flashing instructions: Option 1 (from bootloader web) - Hold reset button on the back of router when plugging in power (for at-least 10 seconds after plugged in) - Connect to a Lan port - Set computer IP to 10.10.10.3 - Go to http://10.10.10.123 in a web browser - Click the Browse... Button and select the *squashfs.sysupgrade.bin file then click APPLY Option 2 (from the stock admin web) - Go to firmware upgrade - Upload the **factory** image *initramfs.bin first - Boot into openwrt - From Luci web in openwrt upload the *squashfs.sysupgrade.bin Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added v1 to the compatible identifier, added pciid for the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi to prepare for a possible F9K1103 patch]
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network5
2 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index cbc003a1de..df5dd84d5a 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -60,6 +60,10 @@ bdcom,wap2100-sk|\
hiwifi,hc5861b)
set_wifi_led "$boardname:green:wlan2g"
;;
+belkin,f9k1109v1)
+ set_usb_led "$boardname:green:usb1"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
+ ;;
broadway)
set_wifi_led "$boardname:red:wps_active"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f968aafc8e..8417ac68ab 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -199,6 +199,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
;;
+ belkin,f9k1109v1|\
rt-n15|\
wl-351)
ucidef_add_switch "switch0" \
@@ -483,6 +484,10 @@ ramips_setup_macs()
lan_mac=$(macaddr_setbit_la "$lan_mac")
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
+ belkin,f9k1109v1)
+ wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
+ lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
+ ;;
br-6475nd)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(mtd_get_mac_binary devdata 7)