diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2018-11-17 08:47:40 +0000 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-11-26 12:16:52 +0100 |
| commit | 20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c (patch) | |
| tree | 514411700431f59bb7f7b6aa5141338f7e4498df /target/linux/ramips/base-files/etc | |
| parent | b85fe43ec8c4d4aa34d3c0bbb3e57da3f176526b (diff) | |
| download | upstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.tar.gz upstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.tar.bz2 upstream-20b09a2125f5b35ade1f3e9cebb15fe03e3b4e3c.zip | |
ramips: add support for Lava LR-25G001
The Lava LR-25G001 Wireless Router is based on the MT7620A SoC.
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7610EN)
- 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN)
- 2x external, detachable antennas
- 1x USB 2.0
- UART (J3) header on PCB (57600 8n1)
- 8x LED (3x GPIO-controlled), 2x button
- JBOOT bootloader
Known issues:
- Work only three Gigabit ports (3/5, 1 WAN and 2LAN)
Installation:
Apply factory image via http web-gui or JBOOT recovery page
How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
3 files changed, 9 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 29d3c31275..2f83f221f1 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -195,6 +195,10 @@ kn_rf|\ kng_rc) set_wifi_led "$boardname:green:wifi" ;; +lava,lr-25g001) + ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1" + ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0" + ;; linkits7688) ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 6d5db45c50..043607df5b 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -353,6 +353,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "4:lan" "6@eth0" ;; + lava,lr-25g001|\ tew-691gr|\ tew-692gr|\ wlr-6000) @@ -475,7 +476,8 @@ ramips_setup_macs() ;; dlink,dwr-116-a1|\ dlink,dwr-118-a2|\ - dlink,dwr-921-c1) + dlink,dwr-921-c1|\ + lava,lr-25g001) wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) lan_mac=$(macaddr_add "$wan_mac" 1) ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 711b8388ba..aee446d156 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -56,7 +56,8 @@ case "$FIRMWARE" in case $board in dlink,dwr-116-a1|\ dlink,dwr-118-a2|\ - dlink,dwr-921-c1) + dlink,dwr-921-c1|\ + lava,lr-25g001) wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) wifi_mac=$(macaddr_add "$wan_mac" 1) jboot_eeprom_extract "config" 0xE000 |