aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc/diag.sh
diff options
context:
space:
mode:
authorKristian Evensen <kristian.evensen@gmail.com>2017-02-04 21:28:52 +0100
committerMathias Kresin <dev@kresin.me>2017-02-05 22:23:28 +0100
commitbb7068f26c4bd89977f3205672f19be60924101c (patch)
tree77bc8176e276951dfa6fdb9207696fde862709db /target/linux/ramips/base-files/etc/diag.sh
parent40fb293f240f14013a203d553add70891d966e34 (diff)
downloadupstream-bb7068f26c4bd89977f3205672f19be60924101c.tar.gz
upstream-bb7068f26c4bd89977f3205672f19be60924101c.tar.bz2
upstream-bb7068f26c4bd89977f3205672f19be60924101c.zip
ramips: add support for Sanlinking D240
The Sanlinking Technologies D240 (http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same device as the ZBT WE826, so adding support for it in LEDE is straight forward. The differences is that the D240 has two mini-PCIe slots (instead of one), blue LEDs and supports PoE. Specification: * CPU: MT7620A * 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps. * 16 MB Flash. * 128 MB RAM. * 1x USB 2.0 port. * 2x mini-PCIe slots. * 2x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to test the SD card reader. The device comes pre-installed with an older version of OpenWRT, including Luci. In order to install LEDE, you need to follow the existing procedure for updating OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. The default router address is 192.168.10.1 and username/password admin/root (at least on my devices). If you brick the device, the procedure for recovery is the same as for the WE826. Please see the wiki page for that device for instructions. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc/diag.sh')
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 5fb221380e..744ff3c2e6 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -108,6 +108,7 @@ get_status_led() {
w502u)
status_led="$board:blue:wps"
;;
+ d240|\
dap-1350|\
na930|\
pbr-m1|\