diff options
| author | David Bauer <mail@david-bauer.net> | 2019-07-03 14:50:14 +0200 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2019-07-21 13:10:12 +0200 |
| commit | abe137ff5ee322321a7905e73f084514f2e86b38 (patch) | |
| tree | dbb48c518039aa6aed7e46ee8102967055f6609f /target/linux/ramips/base-files/etc/board.d | |
| parent | 5cd9b50d69cb42d55b9cc466b749b41d1da465de (diff) | |
| download | upstream-abe137ff5ee322321a7905e73f084514f2e86b38.tar.gz upstream-abe137ff5ee322321a7905e73f084514f2e86b38.tar.bz2 upstream-abe137ff5ee322321a7905e73f084514f2e86b38.zip | |
ramips: add support for ASUS RT-AC57U
SoC: MediaTek MT7621AT
RAM: 128M (Winbond W631GG6KB-15)
FLASH: 16MB (Spansion S25FL128SA)
WiFi: MediaTek MT7603EN bgn 2SS
WiFi: MediaTek MT7612EN nac 2SS
BTN: Reset - WPS
LED: - Power
- LAN {1-4}
- WAN
- WiFi 2.4 GHz
- WiFi 5 GHz
- USB
UART: UART is present next to the Power LED.
TX - RX - GND - 3V3 / 57600-8N1
3V3 is the nearest one to the Power LED.
Installation
------------
Via TFTP:
1. Set your computers IP-Address to 192.168.1.75.
2. Power up the Router with the Reset button pressed.
3. Release the Reset button after 5 seconds.
4. Upload OpenWRT sysupgrade image via TFTP:
> tftp -4 -v -m binary 192.168.1.1 -c put <IMAGE>
Via SSH:
Note: User/password for SSH is identical with the one used in the
Web-interface.
1. Complete the initial setup wizard.
2. Activate SSH under "Administration" -> "System".
3. Transfer the OpenWrt sysupgrade image via scp:
> scp owrt.bin admin@192.168.1.1:/tmp
4. Connect via SSH to the router.
> ssh admin@192.168.1.1
5. Write the OpenWrt image to flash.
> mtd-write -i /tmp/owrt.bin -d linux
6. Reboot the router
> reboot
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 14e0e4f138e35c3e2a15cc3a836c939547ee053b)
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 96e5b7e1cc..0f2afe0425 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -213,6 +213,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" ;; + asus,rt-ac57u|\ atp-52b|\ awm002-evb-4M|\ awm002-evb-8M|\ @@ -495,6 +496,11 @@ ramips_setup_macs() wmdr-143n) lan_mac=$(cat /sys/class/net/eth0/address) ;; + asus,rt-ac57u|\ + vr500) + lan_mac=$(mtd_get_mac_binary factory 57344) + wan_mac=$(mtd_get_mac_binary factory 57350) + ;; carambola|\ freestation5|\ w502u|\ @@ -647,10 +653,6 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR) wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR) ;; - vr500) - lan_mac=$(mtd_get_mac_binary factory 57344) - wan_mac=$(mtd_get_mac_binary factory 57350) - ;; w306r-v20) lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 5) |