diff options
| author | Deng Qingfang <dengqf6@mail2.sysu.edu.cn> | 2018-08-10 01:22:46 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-08-14 10:21:32 +0200 |
| commit | d20f4fc628e9e3c1e1d4063a0798e4097ffb3c4a (patch) | |
| tree | 006e341d74b48dd3027c4352aaafb171536165b9 /target/linux/ramips/base-files/etc/board.d/02_network | |
| parent | 1213504750bf27b46fd958d236fcf56f33d2d8cd (diff) | |
| download | upstream-d20f4fc628e9e3c1e1d4063a0798e4097ffb3c4a.tar.gz upstream-d20f4fc628e9e3c1e1d4063a0798e4097ffb3c4a.tar.bz2 upstream-d20f4fc628e9e3c1e1d4063a0798e4097ffb3c4a.zip | |
ramips: add support for HiWiFi HC5861Bold-master
HiWiFi "Gee Enjoy1200" HC5861B is a dual-band router based on MediaTek MT7628AN
https://www.hiwifi.com/enjoy-view
Specifications:
- MediaTek MT7628AN 580MHz
- 128 MB DDR2 RAM
- 16 MB SPI Flash
- 2.4G MT7628AN 802.11bgn 2T2R 300Mbps
- 5G MT7612EN 802.11ac 2T2R 867Mbps
- 5x 10/100 Mbps Ethernet
Flash instruction:
1. Get SSH access to the router
2. SSH to router with `ssh -p 1022 root@192.168.199.1`, The SSH password is the same as the webconfig one
3. Upload OpenWrt sysupgrade firmware into the router's `/tmp` folder with SCP
4. Run `mtd write /tmp/<filename> firmware`
5. reboot
Everything is working
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 3ae01448b5..915c3584c5 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -199,6 +199,7 @@ ramips_setup_interfaces() gl-mt300n|\ gl-mt750|\ hg255d|\ + hiwifi,hc5861b|\ jhr-n805r|\ jhr-n825r|\ jhr-n926r|\ @@ -483,7 +484,8 @@ ramips_setup_macs() ;; hc5*61|\ hc5661a|\ - hc5962) + hc5962|\ + hiwifi,hc5861b) lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "` [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) |