From d20f4fc628e9e3c1e1d4063a0798e4097ffb3c4a Mon Sep 17 00:00:00 2001 From: Deng Qingfang Date: Fri, 10 Aug 2018 01:22:46 +0800 Subject: ramips: add support for HiWiFi HC5861B HiWiFi "Gee Enjoy1200" HC5861B is a dual-band router based on MediaTek MT7628AN https://www.hiwifi.com/enjoy-view Specifications: - MediaTek MT7628AN 580MHz - 128 MB DDR2 RAM - 16 MB SPI Flash - 2.4G MT7628AN 802.11bgn 2T2R 300Mbps - 5G MT7612EN 802.11ac 2T2R 867Mbps - 5x 10/100 Mbps Ethernet Flash instruction: 1. Get SSH access to the router 2. SSH to router with `ssh -p 1022 root@192.168.199.1`, The SSH password is the same as the webconfig one 3. Upload OpenWrt sysupgrade firmware into the router's `/tmp` folder with SCP 4. Run `mtd write /tmp/ firmware` 5. reboot Everything is working Signed-off-by: Deng Qingfang --- target/linux/ramips/base-files/etc/board.d/02_network | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips/base-files/etc/board.d/02_network') diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 3ae01448b5..915c3584c5 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -199,6 +199,7 @@ ramips_setup_interfaces() gl-mt300n|\ gl-mt750|\ hg255d|\ + hiwifi,hc5861b|\ jhr-n805r|\ jhr-n825r|\ jhr-n926r|\ @@ -483,7 +484,8 @@ ramips_setup_macs() ;; hc5*61|\ hc5661a|\ - hc5962) + hc5962|\ + hiwifi,hc5861b) lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "` [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) -- cgit v1.2.3