diff options
| author | L. D. Pinney <ldpinney@gmail.com> | 2017-07-22 09:15:56 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-07-25 21:02:53 +0200 |
| commit | 77645ffcd9ad767be02ea6d5cfe042928a3565d1 (patch) | |
| tree | 3211ef40796a33dd3dc3dd865fdc15648d6f0e01 /target/linux/ramips/base-files/etc/board.d/01_leds | |
| parent | 4faf3149331e80db1e9a7425ad02e3c54492cea5 (diff) | |
| download | upstream-77645ffcd9ad767be02ea6d5cfe042928a3565d1.tar.gz upstream-77645ffcd9ad767be02ea6d5cfe042928a3565d1.tar.bz2 upstream-77645ffcd9ad767be02ea6d5cfe042928a3565d1.zip | |
ramips: add support for the GnuBee Personal Cloud One
The GnuBee Personal Cloud One crowdfunded on https://www.crowdsupply.com
It is a low-cost, low-power, network-attached storage device.
Specifications:
- SoC: MediaTek MT7621AT
- RAM: DDR3 512 MB
- Flash: 32 MB
- Six SATA ports for 2.5" Drives
- One micro SDcard
- One USB 3.0
- Two USB 2.0
- Gigabit Ethernet: 1 x WAN and 1 x LAN
- UART 3.5mm Audio Jack or 3 pin header - 57600 8N1
- Four GPIOs available on a pin header
Flash instructions:
The GnuBee Personal Cloud One ships with libreCMC installed.
libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt.
As such one can upgrade using the webinterface or sysupgrade.
Das U-Boot has multiple options for recovery or updates including :
- USB
- http
- tftp
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use switchdev led trigger, all interfaces are in vlan1; rename leds
according to board.d setting; remove ge2 group from the pinmux, this
group doesn't exist in the driver]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d/01_leds')
| -rw-r--r--[-rwxr-xr-x] | target/linux/ramips/base-files/etc/board.d/01_leds | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 8ea464516c..8678a77796 100755..100644 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -183,6 +183,10 @@ fonera20n) set_usb_led "$board:orange:usb" set_wifi_led "$board:orange:wifi" ;; +gb-pc1) + ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x01" + ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x10" + ;; gl-mt300a|\ gl-mt300n|\ gl-mt750) |