From 77645ffcd9ad767be02ea6d5cfe042928a3565d1 Mon Sep 17 00:00:00 2001 From: "L. D. Pinney" Date: Sat, 22 Jul 2017 09:15:56 +0800 Subject: ramips: add support for the GnuBee Personal Cloud One The GnuBee Personal Cloud One crowdfunded on https://www.crowdsupply.com It is a low-cost, low-power, network-attached storage device. Specifications: - SoC: MediaTek MT7621AT - RAM: DDR3 512 MB - Flash: 32 MB - Six SATA ports for 2.5" Drives - One micro SDcard - One USB 3.0 - Two USB 2.0 - Gigabit Ethernet: 1 x WAN and 1 x LAN - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1 - Four GPIOs available on a pin header Flash instructions: The GnuBee Personal Cloud One ships with libreCMC installed. libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt. As such one can upgrade using the webinterface or sysupgrade. Das U-Boot has multiple options for recovery or updates including : - USB - http - tftp Signed-off-by: L. D. Pinney [use switchdev led trigger, all interfaces are in vlan1; rename leds according to board.d setting; remove ge2 group from the pinmux, this group doesn't exist in the driver] Signed-off-by: Mathias Kresin --- target/linux/ramips/base-files/etc/board.d/01_leds | 4 ++++ 1 file changed, 4 insertions(+) mode change 100755 => 100644 target/linux/ramips/base-files/etc/board.d/01_leds (limited to 'target/linux/ramips/base-files/etc/board.d/01_leds') diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds old mode 100755 new mode 100644 index 8ea464516c..8678a77796 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -183,6 +183,10 @@ fonera20n) set_usb_led "$board:orange:usb" set_wifi_led "$board:orange:wifi" ;; +gb-pc1) + ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x01" + ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x10" + ;; gl-mt300a|\ gl-mt300n|\ gl-mt750) -- cgit v1.2.3