oxnas: reboot target

Reboot the oxnas target based on Linux 4.14 by rebasing our support on
top of the now-existing upstream kernel support.
This commit brings oxnas support to the level of v4.17 having upstream
drivers for Ethernet, Serial and NAND flash.
Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the
new platform code and device-tree.
Re-introduce base-files from old oxnas target which works for now but
needs further clean-up towards generic board support.

Functional issues:
 * PCIe won't come up (hence no USB3 on Shuttle KD20)
 * I2C bus of Akitio myCloud device is likely not to work (missing
   debounce support in new pinctrl driver)

Code-style issues:
 * plla/pllb needs further cleanup -- currently their users are writing
   into the syscon regmap after acquireling the clk instead of using
   defined clk_*_*() functions to setup multipliers and dividors.
 * PCIe phy needs its own little driver.
 * SATA driver is a monster and should be split into an mfd having
   a raidctrl regmap, sata controller, sata ports and sata phy.

Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(squash-picked commit 17511a7ea8 and commit dcc34574ef from master)

1 files changed, 273 insertions, 3 deletions

diff --git a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
index 9e8d6d9f93..7cf3ad1670 100644
--- a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
+++ b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
@@ -22,9 +22,279 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/reset.h>
-#include <mach/iomap.h>
-#include <mach/hardware.h>
-#include <mach/utils.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+#define OXNAS_UART1_BASE	0x44200000
+#define OXNAS_UART1_SIZE	SZ_32
+#define OXNAS_UART1_BASE_VA	0xF0000000
+
+#define OXNAS_UART2_BASE	0x44300000
+#define OXNAS_UART2_SIZE	SZ_32
+
+#define OXNAS_PERCPU_BASE	0x47000000
+#define OXNAS_PERCPU_SIZE	SZ_8K
+#define OXNAS_PERCPU_BASE_VA	0xF0002000
+
+#define OXNAS_SYSCRTL_BASE	0x44E00000
+#define OXNAS_SYSCRTL_SIZE	SZ_4K
+#define OXNAS_SYSCRTL_BASE_VA	0xF0004000
+
+#define OXNAS_SECCRTL_BASE	0x44F00000
+#define OXNAS_SECCRTL_SIZE	SZ_4K
+#define OXNAS_SECCRTL_BASE_VA	0xF0005000
+
+#define OXNAS_RPSA_BASE		0x44400000
+#define OXNAS_RPSA_SIZE		SZ_4K
+#define OXNAS_RPSA_BASE_VA	0xF0006000
+
+#define OXNAS_RPSC_BASE		0x44500000
+#define OXNAS_RPSC_SIZE		SZ_4K
+#define OXNAS_RPSC_BASE_VA	0xF0007000
+
+
+/*
+ * Location of flags and vectors in SRAM for controlling the booting of the
+ * secondary ARM11 processors.
+ */
+
+#define OXNAS_SCU_BASE_VA		OXNAS_PERCPU_BASE_VA
+#define OXNAS_GICN_BASE_VA(n)		(OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100)
+
+#define HOLDINGPEN_CPU			IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
+#define HOLDINGPEN_LOCATION		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
+
+/**
+ * System block reset and clock control
+ */
+#define SYS_CTRL_PCI_STAT		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20)
+#define SYSCTRL_CLK_STAT		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24)
+#define SYS_CTRL_CLK_SET_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C)
+#define SYS_CTRL_CLK_CLR_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30)
+#define SYS_CTRL_RST_SET_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34)
+#define SYS_CTRL_RST_CLR_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38)
+
+#define SYS_CTRL_PLLSYS_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48)
+#define SYS_CTRL_CLK_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64)
+#define SYS_CTRL_PLLSYS_KEY_CTRL	IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C)
+#define SYS_CTRL_GMAC_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78)
+#define SYS_CTRL_GMAC_DELAY_CTRL	IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100)
+
+/* Scratch registers */
+#define SYS_CTRL_SCRATCHWORD0		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
+#define SYS_CTRL_SCRATCHWORD1		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
+#define SYS_CTRL_SCRATCHWORD2		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc)
+#define SYS_CTRL_SCRATCHWORD3		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0)
+
+#define SYS_CTRL_PLLA_CTRL0		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0)
+#define SYS_CTRL_PLLA_CTRL1		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4)
+#define SYS_CTRL_PLLA_CTRL2		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8)
+#define SYS_CTRL_PLLA_CTRL3		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC)
+
+#define SYS_CTRL_USBHSMPH_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40)
+#define SYS_CTRL_USBHSMPH_STAT		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44)
+#define SYS_CTRL_REF300_DIV		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8)
+#define SYS_CTRL_USBHSPHY_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84)
+#define SYS_CTRL_USB_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90)
+
+/* pcie */
+#define SYS_CTRL_HCSL_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114)
+
+/* System control multi-function pin function selection */
+#define SYS_CTRL_SECONDARY_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14)
+#define SYS_CTRL_TERTIARY_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c)
+#define SYS_CTRL_QUATERNARY_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94)
+#define SYS_CTRL_DEBUG_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c)
+#define SYS_CTRL_ALTERNATIVE_SEL	IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4)
+#define SYS_CTRL_PULLUP_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac)
+
+/* Secure control multi-function pin function selection */
+#define SEC_CTRL_SECONDARY_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14)
+#define SEC_CTRL_TERTIARY_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c)
+#define SEC_CTRL_QUATERNARY_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94)
+#define SEC_CTRL_DEBUG_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c)
+#define SEC_CTRL_ALTERNATIVE_SEL	IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4)
+#define SEC_CTRL_PULLUP_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac)
+
+#define SEC_CTRL_COPRO_CTRL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68)
+#define SEC_CTRL_SECURE_CTRL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98)
+#define SEC_CTRL_LEON_DEBUG		IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0)
+#define SEC_CTRL_PLLB_DIV_CTRL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8)
+#define SEC_CTRL_PLLB_CTRL0		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0)
+#define SEC_CTRL_PLLB_CTRL1		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
+#define SEC_CTRL_PLLB_CTRL8		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
+
+#define RPSA_IRQ_SOFT			IOMEM(OXNAS_RPSA_BASE_VA + 0x10)
+#define RPSA_FIQ_ENABLE			IOMEM(OXNAS_RPSA_BASE_VA + 0x108)
+#define RPSA_FIQ_DISABLE		IOMEM(OXNAS_RPSA_BASE_VA + 0x10C)
+#define RPSA_FIQ_IRQ_TO_FIQ		IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC)
+
+#define RPSC_IRQ_SOFT			IOMEM(OXNAS_RPSC_BASE_VA + 0x10)
+#define RPSC_FIQ_ENABLE			IOMEM(OXNAS_RPSC_BASE_VA + 0x108)
+#define RPSC_FIQ_DISABLE		IOMEM(OXNAS_RPSC_BASE_VA + 0x10C)
+#define RPSC_FIQ_IRQ_TO_FIQ		IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC)
+
+#define RPSA_TIMER2_VAL			IOMEM(OXNAS_RPSA_BASE_VA + 0x224)
+
+#define REF300_DIV_INT_SHIFT		8
+#define REF300_DIV_FRAC_SHIFT		0
+#define REF300_DIV_INT(val)		((val) << REF300_DIV_INT_SHIFT)
+#define REF300_DIV_FRAC(val)		((val) << REF300_DIV_FRAC_SHIFT)
+
+#define USBHSPHY_SUSPENDM_MANUAL_ENABLE		16
+#define USBHSPHY_SUSPENDM_MANUAL_STATE		15
+#define USBHSPHY_ATE_ESET			14
+#define USBHSPHY_TEST_DIN			6
+#define USBHSPHY_TEST_ADD			2
+#define USBHSPHY_TEST_DOUT_SEL			1
+#define USBHSPHY_TEST_CLK			0
+
+#define USB_CTRL_USBAPHY_CKSEL_SHIFT	5
+#define USB_CLK_XTAL0_XTAL1		(0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+#define USB_CLK_XTAL0			(1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+#define USB_CLK_INTERNAL		(2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+
+#define USBAMUX_DEVICE			BIT(4)
+
+#define USBPHY_REFCLKDIV_SHIFT		2
+#define USB_PHY_REF_12MHZ		(0 << USBPHY_REFCLKDIV_SHIFT)
+#define USB_PHY_REF_24MHZ		(1 << USBPHY_REFCLKDIV_SHIFT)
+#define USB_PHY_REF_48MHZ		(2 << USBPHY_REFCLKDIV_SHIFT)
+
+#define USB_CTRL_USB_CKO_SEL_BIT	0
+
+#define USB_INT_CLK_XTAL		0
+#define USB_INT_CLK_REF300		2
+#define USB_INT_CLK_PLLB		3
+
+#define SYS_CTRL_GMAC_CKEN_RX_IN	14
+#define SYS_CTRL_GMAC_CKEN_RXN_OUT	13
+#define SYS_CTRL_GMAC_CKEN_RX_OUT	12
+#define SYS_CTRL_GMAC_CKEN_TX_IN	10
+#define SYS_CTRL_GMAC_CKEN_TXN_OUT	9
+#define SYS_CTRL_GMAC_CKEN_TX_OUT	8
+#define SYS_CTRL_GMAC_RX_SOURCE		7
+#define SYS_CTRL_GMAC_TX_SOURCE		6
+#define SYS_CTRL_GMAC_LOW_TX_SOURCE	4
+#define SYS_CTRL_GMAC_AUTO_TX_SOURCE	3
+#define SYS_CTRL_GMAC_RGMII		2
+#define SYS_CTRL_GMAC_SIMPLE_MUX	1
+#define SYS_CTRL_GMAC_CKEN_GTX		0
+#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT		0
+#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT	8
+#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT		16
+#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT	24
+#define SYS_CTRL_GMAC_TX_VARDELAY(d)	((d)<<SYS_CTRL_GMAC_TX_VARDELAY_SHIFT)
+#define SYS_CTRL_GMAC_TXN_VARDELAY(d)	((d)<<SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT)
+#define SYS_CTRL_GMAC_RX_VARDELAY(d)	((d)<<SYS_CTRL_GMAC_RX_VARDELAY_SHIFT)
+#define SYS_CTRL_GMAC_RXN_VARDELAY(d)	((d)<<SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT)
+
+#define PLLB_BYPASS			1
+#define PLLB_ENSAT			3
+#define PLLB_OUTDIV			4
+#define PLLB_REFDIV			8
+#define PLLB_DIV_INT_SHIFT		8
+#define PLLB_DIV_FRAC_SHIFT		0
+#define PLLB_DIV_INT(val)		((val) << PLLB_DIV_INT_SHIFT)
+#define PLLB_DIV_FRAC(val)		((val) << PLLB_DIV_FRAC_SHIFT)
+
+#define SYS_CTRL_CKCTRL_PCI_DIV_BIT	0
+#define SYS_CTRL_CKCTRL_SLOW_BIT	8
+
+#define SYS_CTRL_UART2_DEQ_EN		0
+#define SYS_CTRL_UART3_DEQ_EN		1
+#define SYS_CTRL_UART3_IQ_EN		2
+#define SYS_CTRL_UART4_IQ_EN		3
+#define SYS_CTRL_UART4_NOT_PCI_MODE	4
+
+#define SYS_CTRL_PCI_CTRL1_PCI_STATIC_RQ_BIT	11
+
+#define PLLA_REFDIV_MASK		0x3F
+#define PLLA_REFDIV_SHIFT		8
+#define PLLA_OUTDIV_MASK		0x7
+#define PLLA_OUTDIV_SHIFT		4
+
+/* bit numbers of clock control register */
+#define SYS_CTRL_CLK_COPRO		0
+#define SYS_CTRL_CLK_DMA		1
+#define SYS_CTRL_CLK_CIPHER		2
+#define SYS_CTRL_CLK_SD			3
+#define SYS_CTRL_CLK_SATA		4
+#define SYS_CTRL_CLK_I2S		5
+#define SYS_CTRL_CLK_USBHS		6
+#define SYS_CTRL_CLK_MACA		7
+#define SYS_CTRL_CLK_MAC		SYS_CTRL_CLK_MACA
+#define SYS_CTRL_CLK_PCIEA		8
+#define SYS_CTRL_CLK_STATIC		9
+#define SYS_CTRL_CLK_MACB		10
+#define SYS_CTRL_CLK_PCIEB		11
+#define SYS_CTRL_CLK_REF600		12
+#define SYS_CTRL_CLK_USBDEV		13
+#define SYS_CTRL_CLK_DDR		14
+#define SYS_CTRL_CLK_DDRPHY		15
+#define SYS_CTRL_CLK_DDRCK		16
+
+
+/* bit numbers of reset control register */
+#define SYS_CTRL_RST_SCU		0
+#define SYS_CTRL_RST_COPRO		1
+#define SYS_CTRL_RST_ARM0		2
+#define SYS_CTRL_RST_ARM1		3
+#define SYS_CTRL_RST_USBHS		4
+#define SYS_CTRL_RST_USBHSPHYA		5
+#define SYS_CTRL_RST_MACA		6
+#define SYS_CTRL_RST_MAC		SYS_CTRL_RST_MACA
+#define SYS_CTRL_RST_PCIEA		7
+#define SYS_CTRL_RST_SGDMA		8
+#define SYS_CTRL_RST_CIPHER		9
+#define SYS_CTRL_RST_DDR		10
+#define SYS_CTRL_RST_SATA		11
+#define SYS_CTRL_RST_SATA_LINK		12
+#define SYS_CTRL_RST_SATA_PHY		13
+#define SYS_CTRL_RST_PCIEPHY		14
+#define SYS_CTRL_RST_STATIC		15
+#define SYS_CTRL_RST_GPIO		16
+#define SYS_CTRL_RST_UART1		17
+#define SYS_CTRL_RST_UART2		18
+#define SYS_CTRL_RST_MISC		19
+#define SYS_CTRL_RST_I2S		20
+#define SYS_CTRL_RST_SD			21
+#define SYS_CTRL_RST_MACB		22
+#define SYS_CTRL_RST_PCIEB		23
+#define SYS_CTRL_RST_VIDEO		24
+#define SYS_CTRL_RST_DDR_PHY		25
+#define SYS_CTRL_RST_USBHSPHYB		26
+#define SYS_CTRL_RST_USBDEV		27
+#define SYS_CTRL_RST_ARMDBG		29
+#define SYS_CTRL_RST_PLLA		30
+#define SYS_CTRL_RST_PLLB		31
+
+static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
+{
+	u32 val = readl_relaxed(p);
+
+	val &= ~mask;
+	writel_relaxed(val, p);
+}
+
+static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
+{
+	u32 val = readl_relaxed(p);
+
+	val |= mask;
+	writel_relaxed(val, p);
+}
+
+static inline void oxnas_register_value_mask(void __iomem *p,
+					     unsigned mask, unsigned new_value)
+{
+	/* TODO sanity check mask & new_value = new_value */
+	u32 val = readl_relaxed(p);
+
+	val &= ~mask;
+	val |= new_value;
+	writel_relaxed(val, p);
+}
 
 #define VERSION_ID_MAGIC		0x082510b5
 #define LINK_UP_TIMEOUT_SECONDS		1