add new target 'oxnas'

This is the oxnas target previously developed at
http://gitorious.org/openwrt-oxnas
Basically, this consolidates the changes and addtionas from
http://github.org/kref/linux-oxnas
into a new OpenWrt hardware target 'oxnas' adding support for
 PLX Technology NAS7820/NAS7821/NAS7825/...
formally known as
 Oxford Semiconductor OXE810SE/OXE815/OX820/...

For now there are 4 supported boards:
Cloud Engines Pogoplug V3 (without PCIe)
 fully supported

Cloud Engines Pogoplug Pro (with PCIe)
 fully supported

MitraStar STG-212
 aka ZyXEL NSA-212,
 aka Medion Akoya P89625 / P89636 / P89626 / P89630,
 aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587
 fully supported, see http://wiki.openwrt.org/toh/medion/md86587

Shuttle KD-20
 partially supported (S-ATA driver lacks support for 2nd port)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43388

3 files changed, 72 insertions, 0 deletions

diff --git a/target/linux/oxnas/base-files/etc/board.d/01_leds b/target/linux/oxnas/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..17e37cd91c
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/board.d/01_leds
@@ -0,0 +1,25 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults-new.sh
+. /lib/oxnas.sh
+
+board=$(oxnas_board_name)
+board_config_update
+
+case $board in
+	stg-212)
+		ucidef_set_led_default "power" "power" "zyxel:blue:status" "1"
+		ucidef_set_led_usbdev "usb" "USB" "$1" "1-1"
+		;;
+	kd20)
+		ucidef_set_led_default "power" "power" "kd20:blue:status" "1"
+		;;
+	pogoplugpro | pogoplugv3)
+		ucidef_set_led_default "power" "power" "pogoplug:blue:internal" "1"
+		;;
+
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/oxnas/base-files/etc/board.d/02_network b/target/linux/oxnas/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..3a1058402e
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/board.d/02_network
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults-new.sh
+. /lib/functions/system.sh
+
+board_config_update
+
+ucidef_set_interface_lan "eth0"
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/oxnas/base-files/etc/diag.sh b/target/linux/oxnas/base-files/etc/diag.sh
new file mode 100755
index 0000000000..ba42218049
--- /dev/null
+++ b/target/linux/oxnas/base-files/etc/diag.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+# Copyright (C) 2009-2013 OpenWrt.org
+
+. /lib/functions/leds.sh
+. /lib/oxnas.sh
+
+get_status_led() {
+	case $(oxnas_board_name) in
+	stg212)
+		status_led="zyxel:blue:status"
+		;;
+	kd20)
+		status_led="kd20:blue:status"
+		;;
+	pogoplugpro | pogoplugv3)
+		status_led="pogoplug:blue:internal"
+		;;
+	esac
+}
+
+set_state() {
+	get_status_led
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}