diff options
| author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2020-04-24 02:22:44 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-17 21:03:30 +0200 |
| commit | a0ef42e77c367312df7edc78dbd0d18a3faf9808 (patch) | |
| tree | d4959e3bf708713517eca3289e39f5bc744d6fe2 /target/linux/mxs/config-5.4 | |
| parent | 0486641849f4ecb6a29d0f5a9ec2b900380ba2b7 (diff) | |
| download | upstream-a0ef42e77c367312df7edc78dbd0d18a3faf9808.tar.gz upstream-a0ef42e77c367312df7edc78dbd0d18a3faf9808.tar.bz2 upstream-a0ef42e77c367312df7edc78dbd0d18a3faf9808.zip | |
ath79: add support for Ubiquiti PowerBeam 5AC 500
The Ubiquiti PowerBeam 5AC 500 (PBE-5AC-500) is an outdoor 802.11ac
5 GHz bridge with a radio feed and a dish antenna.
Specifications:
- SoC: Qualcomm Atheros QCA9558
- RAM: 128 MB DDR2
- Flash: 16 MB SPI NOR (mx25l12805d)
- Ethernet: 1x 10/100/1000 Mbps Atheros 8031, 24 Vdc PoE-in
- WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff
- Buttons: 1x (reset)
- LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue
- UART: not tested
Not supported:
- RSSI LEDs (probably through 74HC595 chip)
Installation from stock airOS firmware:
- Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at
https://openwrt.org/toh/ubiquiti/common
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Diffstat (limited to 'target/linux/mxs/config-5.4')
0 files changed, 0 insertions, 0 deletions