mvebu: drop linux 4.4 and 4.9 support

Signed-off-by: Felix Fietkau <nbd@nbd.name>

2 files changed, 0 insertions, 570 deletions

diff --git a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts b/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts
deleted file mode 100644
index ac4ac1b1b1..0000000000
--- a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT3200ACM (Rango)
- *
- * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385.dtsi"
-
-/ {
-	model = "Linksys WRT3200ACM";
-	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-
-			spi@10600 {
-				status = "disabled";
-			};
-
-			i2c@11000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-
-				tmp421@4c {
-					compatible = "ti,tmp421";
-					reg = <0x4c>;
-				};
-
-				pca9635@68 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "nxp,pca9635";
-					reg = <0x68>;
-
-					wan_amber@0 {
-						label = "rango:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "rango:white:wan";
-						reg = <0x1>;
-					};
-
-					usb2@5 {
-						label = "rango:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "rango:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "rango:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "rango:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "rango:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-
-			/* J10: VCC, NC, RX, NC, TX, GND  */
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <3>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			ethernet@34000 {
-				status = "okay";
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			mdio {
-				status = "okay";
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdhci_pins>;
-				no-1-8-v;
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-			};
-
-			/* USB part of the eSATA/USB 2.0 port */
-			usb@58000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-				usb-phy = <&usb3_phy>;
-			};
-
-			flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x200000>;  /* 2MB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "u_env";
-					reg = <0x200000 0x20000>;    /* 128KB */
-				};
-
-				partition@220000 {
-					label = "s_env";
-					reg = <0x220000 0x40000>;    /* 256KB */
-				};
-
-				partition@7e0000 {
-					label = "devinfo";
-					reg = <0x7e0000 0x40000>;   /* 256KB */
-					read-only;
-				};
-
-				partition@820000 {
-					label = "sysdiag";
-					reg = <0x820000 0x1e0000>;   /* 1920KB */
-					read-only;
-				};
-
-				/* kernel1 overlaps with rootfs1 by design */
-				partition@a00000 {
-					label = "kernel1";
-					reg = <0xa00000 0x5000000>;  /* 80MB */
-				};
-
-				partition@1000000 {
-					label = "rootfs1";
-					reg = <0x1000000 0x4a00000>;  /* 74MB */
-				};
-
-				/* kernel2 overlaps with rootfs2 by design */
-				partition@5a00000 {
-					label = "kernel2";
-					reg = <0x5a00000 0x5000000>; /* 80MB */
-				};
-
-				partition@6000000 {
-					label = "rootfs2";
-					reg = <0x6000000 0x4a00000>; /* 74MB */
-				};
-
-				/*
-				 * 86MB, last MB is for the BBT, not writable
-				 */
-				partition@aa00000 {
-					label = "syscfg";
-					reg = <0xaa00000 0x5600000>;
-				};
-
-				/*
-				 * Unused area between "s_env" and "devinfo".
-				 * Moved here because otherwise the renumbered
-				 * partitions would break the bootloader
-				 * supplied bootargs
-				 */
-				partition@180000 {
-					label = "unused_area";
-					reg = <0x260000 0x5c0000>;   /* 5.75MB */
-				};
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Marvell 88W8964, 5GHz-only */
-				status = "okay";
-
-				mwlwifi {
-					marvell,2ghz = <0>;
-					marvell,chainmask = <4 4>;
-				};
-
-			};
-
-			pcie@2,0 {
-				/* Marvell 88W8964, 2GHz-only */
-				status = "okay";
-
-				mwlwifi {
-					marvell,5ghz = <0>;
-					marvell,chainmask = <4 4>;
-				};
-
-			};
-		};
-	};
-
-	usb3_phy: usb3_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_xhci0_vbus>;
-	};
-
-	reg_xhci0_vbus: xhci0-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&xhci0_vbus_pins>;
-		regulator-name = "xhci0-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&reset_key_pin &wps_key_pin>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		button@2 {
-			label = "Factory Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin &sata_led_pin &wlan_2g_led_pin &wlan_5g_led_pin>;
-		pinctrl-names = "default";
-
-		sata {
-			label = "rango:white:sata";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		wlan_2g {
-			label = "rango:white:wlan_2g";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan_5g {
-			label = "rango:white:wlan_5g";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			label = "rango:white:power";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth2>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0>;	/* MDIO address 0, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-	};
-
-	mvsw61xx {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "marvell,88e6352";
-		status = "okay";
-		reg = <0x10>;
-
-		mii-bus = <&mdio>;
-		cpu-port-0 = <5>;
-		cpu-port-1 = <6>;
-	};
-
-};
-
-&pinctrl {
-	sata_led_pin: sata-led-pin {
-		marvell,pins = "mpp21";
-		marvell,function = "gpio";
-	};
-
-	wps_key_pin: wps-key-pin {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-
-	reset_key_pin: reset-key-pin {
-		marvell,pins = "mpp29";
-		marvell,function = "gpio";
-	};
-
-	wlan_2g_led_pin: wlan-2g-led-pin {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-
-	wlan_5g_led_pin: wlan-5g-led-pin {
-		marvell,pins = "mpp46";
-		marvell,function = "gpio";
-	};
-
-	xhci0_vbus_pins: xhci0-vbus-pins {
-		marvell,pins = "mpp47";
-		marvell,function = "gpio";
-	};
-
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp56";
-		marvell,function = "gpio";
-	};
-};
diff --git a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-shelby.dts
deleted file mode 100644
index f8dd193ef0..0000000000
--- a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT1900ACS (Shelby)
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT1900ACS";
-	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-
-	soc {
-		internal-regs{
-			i2c@11000 {
-
-				pca9635@68 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-					wan_amber@0 {
-						label = "shelby:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "shelby:white:wan";
-						reg = <0x1>;
-					};
-
-					wlan_2g@2 {
-						label = "shelby:white:wlan_2g";
-						reg = <0x2>;
-					};
-
-					wlan_5g@3 {
-						label = "shelby:white:wlan_5g";
-						reg = <0x3>;
-					};
-
-					usb2@5 {
-						label = "shelby:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "shelby:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "shelby:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "shelby:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "shelby:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-		};
-	};
-
-	gpio-leds {
-		power {
-			label = "shelby:white:power";
-		};
-
-		sata {
-			label = "shelby:white:sata";
-			linux,default-trigger = "disk-activity";
-		};
-	};
-};