From 57a7595a289e80a34f166e66f3cf9191ef772eb3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 9 Apr 2018 09:49:44 +0200 Subject: mvebu: drop linux 4.4 and 4.9 support Signed-off-by: Felix Fietkau --- .../arch/arm/boot/dts/armada-385-linksys-rango.dts | 455 --------------------- .../arm/boot/dts/armada-385-linksys-shelby.dts | 115 ------ 2 files changed, 570 deletions(-) delete mode 100644 target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts delete mode 100644 target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-shelby.dts (limited to 'target/linux/mvebu/files-4.9') diff --git a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts b/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts deleted file mode 100644 index ac4ac1b1b1..0000000000 --- a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts +++ /dev/null @@ -1,455 +0,0 @@ -/* - * Device Tree file for the Linksys WRT3200ACM (Rango) - * - * Copyright (C) 2016 Imre Kaloz - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include -#include -#include "armada-385.dtsi" - -/ { - model = "Linksys WRT3200ACM"; - compatible = "linksys,rango", "linksys,armada385", "marvell,armada385", - "marvell,armada380"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ - }; - - soc { - ranges = ; - - internal-regs { - - spi@10600 { - status = "disabled"; - }; - - i2c@11000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - tmp421@4c { - compatible = "ti,tmp421"; - reg = <0x4c>; - }; - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nxp,pca9635"; - reg = <0x68>; - - wan_amber@0 { - label = "rango:amber:wan"; - reg = <0x0>; - }; - - wan_white@1 { - label = "rango:white:wan"; - reg = <0x1>; - }; - - usb2@5 { - label = "rango:white:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "rango:white:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "rango:white:usb3_2"; - reg = <0x7>; - }; - - wps_white@8 { - label = "rango:white:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "rango:amber:wps"; - reg = <0x9>; - }; - }; - }; - - /* J10: VCC, NC, RX, NC, TX, GND */ - serial@12000 { - status = "okay"; - }; - - ethernet@70000 { - status = "okay"; - phy-mode = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <3>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@34000 { - status = "okay"; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - mdio { - status = "okay"; - }; - - bm@c8000 { - status = "okay"; - }; - - sata@a8000 { - status = "okay"; - }; - - sdhci@d8000 { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci_pins>; - no-1-8-v; - broken-cd; - wp-inverted; - bus-width = <8>; - status = "okay"; - }; - - /* USB part of the eSATA/USB 2.0 port */ - usb@58000 { - status = "okay"; - }; - - usb3@f8000 { - status = "okay"; - usb-phy = <&usb3_phy>; - }; - - flash@d0000 { - status = "okay"; - num-cs = <1>; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MB */ - read-only; - }; - - partition@200000 { - label = "u_env"; - reg = <0x200000 0x20000>; /* 128KB */ - }; - - partition@220000 { - label = "s_env"; - reg = <0x220000 0x40000>; /* 256KB */ - }; - - partition@7e0000 { - label = "devinfo"; - reg = <0x7e0000 0x40000>; /* 256KB */ - read-only; - }; - - partition@820000 { - label = "sysdiag"; - reg = <0x820000 0x1e0000>; /* 1920KB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@a00000 { - label = "kernel1"; - reg = <0xa00000 0x5000000>; /* 80MB */ - }; - - partition@1000000 { - label = "rootfs1"; - reg = <0x1000000 0x4a00000>; /* 74MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@5a00000 { - label = "kernel2"; - reg = <0x5a00000 0x5000000>; /* 80MB */ - }; - - partition@6000000 { - label = "rootfs2"; - reg = <0x6000000 0x4a00000>; /* 74MB */ - }; - - /* - * 86MB, last MB is for the BBT, not writable - */ - partition@aa00000 { - label = "syscfg"; - reg = <0xaa00000 0x5600000>; - }; - - /* - * Unused area between "s_env" and "devinfo". - * Moved here because otherwise the renumbered - * partitions would break the bootloader - * supplied bootargs - */ - partition@180000 { - label = "unused_area"; - reg = <0x260000 0x5c0000>; /* 5.75MB */ - }; - }; - }; - - bm-bppi { - status = "okay"; - }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - /* Marvell 88W8964, 5GHz-only */ - status = "okay"; - - mwlwifi { - marvell,2ghz = <0>; - marvell,chainmask = <4 4>; - }; - - }; - - pcie@2,0 { - /* Marvell 88W8964, 2GHz-only */ - status = "okay"; - - mwlwifi { - marvell,5ghz = <0>; - marvell,chainmask = <4 4>; - }; - - }; - }; - }; - - usb3_phy: usb3_phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <®_xhci0_vbus>; - }; - - reg_xhci0_vbus: xhci0-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&xhci0_vbus_pins>; - regulator-name = "xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&reset_key_pin &wps_key_pin>; - pinctrl-names = "default"; - - button@1 { - label = "WPS"; - linux,code = ; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "Factory Reset Button"; - linux,code = ; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&power_led_pin &sata_led_pin &wlan_2g_led_pin &wlan_5g_led_pin>; - pinctrl-names = "default"; - - sata { - label = "rango:white:sata"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - }; - - wlan_2g { - label = "rango:white:wlan_2g"; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - }; - - wlan_5g { - label = "rango:white:wlan_5g"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - power { - label = "rango:white:power"; - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - dsa@0 { - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð2>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; - - mvsw61xx { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,88e6352"; - status = "okay"; - reg = <0x10>; - - mii-bus = <&mdio>; - cpu-port-0 = <5>; - cpu-port-1 = <6>; - }; - -}; - -&pinctrl { - sata_led_pin: sata-led-pin { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - wps_key_pin: wps-key-pin { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - reset_key_pin: reset-key-pin { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - wlan_2g_led_pin: wlan-2g-led-pin { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - wlan_5g_led_pin: wlan-5g-led-pin { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - - xhci0_vbus_pins: xhci0-vbus-pins { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - - power_led_pin: power-led-pin { - marvell,pins = "mpp56"; - marvell,function = "gpio"; - }; -}; diff --git a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-shelby.dts deleted file mode 100644 index f8dd193ef0..0000000000 --- a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-shelby.dts +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Device Tree file for the Linksys WRT1900ACS (Shelby) - * - * Copyright (C) 2015 Imre Kaloz - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "armada-385-linksys.dtsi" - -/ { - model = "Linksys WRT1900ACS"; - compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385", - "marvell,armada380"; - - soc { - internal-regs{ - i2c@11000 { - - pca9635@68 { - #address-cells = <1>; - #size-cells = <0>; - - wan_amber@0 { - label = "shelby:amber:wan"; - reg = <0x0>; - }; - - wan_white@1 { - label = "shelby:white:wan"; - reg = <0x1>; - }; - - wlan_2g@2 { - label = "shelby:white:wlan_2g"; - reg = <0x2>; - }; - - wlan_5g@3 { - label = "shelby:white:wlan_5g"; - reg = <0x3>; - }; - - usb2@5 { - label = "shelby:white:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "shelby:white:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "shelby:white:usb3_2"; - reg = <0x7>; - }; - - wps_white@8 { - label = "shelby:white:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "shelby:amber:wps"; - reg = <0x9>; - }; - }; - }; - }; - }; - - gpio-leds { - power { - label = "shelby:white:power"; - }; - - sata { - label = "shelby:white:sata"; - linux,default-trigger = "disk-activity"; - }; - }; -}; -- cgit v1.2.3