aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mpc85xx/image
diff options
context:
space:
mode:
authorChris Blake <chrisrblake93@gmail.com>2017-09-30 11:14:58 -0500
committerHauke Mehrtens <hauke@hauke-m.de>2017-10-14 01:23:47 +0200
commitf2b7d9dc1ca3d33f14961cf2885639f4f9e8965e (patch)
tree10f2ed5de3ed465cd70c1e02fc23d1fefe92e2a6 /target/linux/mpc85xx/image
parent8cd6686ef81effb3c30f0508368db3d0600f289d (diff)
downloadupstream-f2b7d9dc1ca3d33f14961cf2885639f4f9e8965e.tar.gz
upstream-f2b7d9dc1ca3d33f14961cf2885639f4f9e8965e.tar.bz2
upstream-f2b7d9dc1ca3d33f14961cf2885639f4f9e8965e.zip
mpc85xx: Add Aerohive HiveAP-330 Access Point
The following adds the Aerohive HiveAP-330 Access Point to LEDE under the mpc85xx/p1020 subtarget. Hardware: - SoC: Freescale P1020NSE2DFB - NAND: Intel JS28F512M29EWH 64MB - Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - 5.0GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - Eth2: Atheros AR8035-A - TPM: Atmel AT97SC3204 - LED Driver: TI LP5521 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; tftpboot 0x1000000 192.168.1.101:lede- mpc85xx-p1020-hiveap-330-initramfs.zImage; tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt; bootm 0x1000000 - 0x6000000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NAND. sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Diffstat (limited to 'target/linux/mpc85xx/image')
-rw-r--r--target/linux/mpc85xx/image/Makefile32
1 files changed, 31 insertions, 1 deletions
diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile
index 25a9b070c5..4738dcf122 100644
--- a/target/linux/mpc85xx/image/Makefile
+++ b/target/linux/mpc85xx/image/Makefile
@@ -21,7 +21,18 @@ endef
zImage:=$(BIN_DIR)/$(IMG_PREFIX)-zImage
-DTS_TARGETS = fsl/p1010rdb-pa tl-wdr4900-v1 fsl/p1020rdb
+DTS_TARGETS = hiveap-330 fsl/p1010rdb-pa tl-wdr4900-v1 fsl/p1020rdb
+
+define Build/empty-initramfs
+ -mkdir $(KDIR_TMP)/empty-initramfs; \
+ cd $(KDIR_TMP)/empty-initramfs; \
+ find . | cpio -o -H newc | gzip -9n > $(KDIR_TMP)/empty-initramfs.gpio.gz
+
+ -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T ramdisk \
+ -C gzip -n "empty initramfs" \
+ -d $(KDIR_TMP)/empty-initramfs.gpio.gz \
+ $(KDIR_TMP)/$(IMG_PREFIX)-empty-initramfs.image
+endef
define Image/BuildKernel
cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
@@ -35,6 +46,21 @@ define Image/BuildKernel/Initramfs
ifeq ($(SUBTARGET),generic)
cp $(KDIR)/cuImage.tl-wdr4900-v1-initramfs $(BIN_DIR)/$(IMG_PREFIX)-tl-wdr4900-v1-initramfs.uImage
endif
+ifeq ($(SUBTARGET),p1020)
+ cp $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-hiveap-330-initramfs.zImage
+endif
+endef
+
+define Image/Build/Aerohive
+ $(call Build/empty-initramfs)
+ifeq ($(2),hiveap-330)
+ ( \
+ dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2).fdt bs=256k conv=sync; \
+ dd if=$(KDIR_TMP)/$(IMG_PREFIX)-empty-initramfs.image bs=256k conv=sync; \
+ dd if=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=40704k conv=sync; \
+ dd if=$(KDIR)/zImage conv=sync; \
+ ) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-sysupgrade.img
+endif
endef
define Image/Build/TPLINK
@@ -50,6 +76,10 @@ define Image/Build/TPLINK
-o $(call sysupname,$(1),$(2))
endef
+define Image/Build/Profile/hiveap-330
+ $(call Image/Build/Aerohive,$(1),hiveap-330)
+endef
+
define Image/Build/Profile/TLWDR4900
$(call Image/Build/TPLINK,$(1),tl-wdr4900-v1,cuImage.tl-wdr4900-v1,0x49000001,1,16Mppc)
endef