diff options
author | David Bauer <mail@david-bauer.net> | 2023-02-18 02:06:54 +0100 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2023-03-10 00:13:29 +0100 |
commit | 788a0cf15c0c62a3b80fde966f7de7037c2dceb7 (patch) | |
tree | 2624baa1bbb5fbaa6b805d87c026dc819cacb1a0 /target/linux/mpc85xx/base-files | |
parent | 0a32f66fea95cabc5d21c945678d918bed8cca47 (diff) | |
download | upstream-788a0cf15c0c62a3b80fde966f7de7037c2dceb7.tar.gz upstream-788a0cf15c0c62a3b80fde966f7de7037c2dceb7.tar.bz2 upstream-788a0cf15c0c62a3b80fde966f7de7037c2dceb7.zip |
mpc85xx: add support for Watchguard Firebox T10
Hardware
--------
SoC: Freescale P1010
RAM: 512MB
FLASH: 1 MB SPI-NOR
512 MB NAND
ETH: 3x Gigabite Ethernet (Atheros AR8033)
SERIAL: Cisco RJ-45 (115200 8N1)
RTC: Battery-Backed RTC (I2C)
Installation
------------
1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI
programmer. The SHA1 hash for the U-Boot password is currently
unknown.
A tool for patching U-Boot is available at
https://github.com/blocktrron/t10-uboot-patcher/
You can also patch the unknown password yourself. The SHA1 hash is
E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA
2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears.
The patched password is '1234' (without quotation marks)
3. Download the OpenWrt initramfs image. Copy it to a TFTP server
reachable at 10.0.1.13/24 and rename it to uImage.
4. Connect the TFTP server to ethernet port 0 of the Watchguard T10.
5. Download and boot the initramfs image by entering "tftpboot; bootm;"
in U-Boot.
6. After OpenWrt booted, create a UBI volume on the old data partition.
The "ubi" mtd partition should be mtd7, check this using
$ cat /proc/mtd
Create a UBI partition by executing
$ ubiformat /dev/mtd7 -y
7. Increase the loadable kernel-size of U-Boot by executing
$ fw_setenv SysAKernSize 800000
8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using
scp. Install the image by using sysupgrade:
$ sysupgrade -n <path-to-sysupgrade>
Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might
have to change the ethernet-port.
9. OpenWrt should now boot from the internal NAND. Enjoy.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 35f6d795134e9b089c4e763a7f58cba7d4e15e42)
Diffstat (limited to 'target/linux/mpc85xx/base-files')
3 files changed, 10 insertions, 1 deletions
diff --git a/target/linux/mpc85xx/base-files/etc/board.d/02_network b/target/linux/mpc85xx/base-files/etc/board.d/02_network index 03153b73d0..7b34f9f308 100644 --- a/target/linux/mpc85xx/base-files/etc/board.d/02_network +++ b/target/linux/mpc85xx/base-files/etc/board.d/02_network @@ -22,6 +22,9 @@ tplink,tl-wdr4900-v1) "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" ucidef_set_interface_macaddr "wan" "$(macaddr_add $(mtd_get_mac_binary u-boot 0x4fc00) 1)" ;; +watchguard,firebox-t10) + ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0" + ;; *) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; diff --git a/target/linux/mpc85xx/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/mpc85xx/base-files/lib/preinit/10_fix_eth_mac.sh index d94eba688c..d84ab5f186 100644 --- a/target/linux/mpc85xx/base-files/lib/preinit/10_fix_eth_mac.sh +++ b/target/linux/mpc85xx/base-files/lib/preinit/10_fix_eth_mac.sh @@ -6,6 +6,11 @@ preinit_set_mac_address() { ip link set dev eth0 address $(mtd_get_mac_ascii cfg1 ethaddr) ip link set dev eth1 address $(mtd_get_mac_ascii cfg1 eth1addr) ;; + watchguard,firebox-t10) + ip link set dev eth0 address "$(mtd_get_mac_text "device_id" 0x1830)" + ip link set dev eth1 address "$(mtd_get_mac_text "device_id" 0x1844)" + ip link set dev eth2 address "$(mtd_get_mac_text "device_id" 0x1858)" + ;; esac } diff --git a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh index 064eeb35bc..226b40a906 100755 --- a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh @@ -14,7 +14,8 @@ platform_do_upgrade() { case "$board" in ocedo,panda|\ - sophos,red-15w-rev1) + sophos,red-15w-rev1|\ + watchguard,firebox-t10) nand_do_upgrade "$1" ;; *) |