diff options
| author | Dongming Han <handongming@gl-inet.com> | 2017-12-07 20:48:19 +0800 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-02-14 09:40:32 +0100 |
| commit | 04d3308b6248ef21a6f0bc3378b342906c2d2865 (patch) | |
| tree | 9180681b935ec6494df250411112327f07e9ef9f /target/linux/mediatek/patches-4.9/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch | |
| parent | 88a41074e8e7012c2cb73b85263425c4c474beb1 (diff) | |
| download | upstream-04d3308b6248ef21a6f0bc3378b342906c2d2865.tar.gz upstream-04d3308b6248ef21a6f0bc3378b342906c2d2865.tar.bz2 upstream-04d3308b6248ef21a6f0bc3378b342906c2d2865.zip | |
ipq806x: add support for GL.iNet GL-B1300
This patch adds support for GL.iNet GL-B1300
Specification:
- SOC: IPQ4028 / QCA Dakota
- RAM: 256 MiB
- FLASH: 32 MiB
- ETH: Qualcomm Atheros QCA8075 Gigabit Switch (2 x LAN, 1 x WAN)
- USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC)
- WLAN1: Qualcomm Atheros QCA4028 2.4GHz 802.11bgn 2:2x2
- WLAN2: Qualcomm Atheros QCA4028 5GHz 802.11a/n/ac 2:2x2
- INPUT: one reset and one WPS button
- LEDS: 3 leds: Power, WIFI(only for 2.4G currently), and one reserved
- UART: 1 x UART on PCB (3.3V, TX, RX, GND) - 115200 8N1
Installation:
Method 1:
- use serial port to stop uboot
- uboot command: run lf
Method 2:
- push down reset button and power on
- wait until three leds constantly on then release
- upgrade by uboot web at http://192.168.1.1
Note:
- the sysupgrade image need to be renamed to lede-gl-b1300.bin in both method.
- the sysupgrade image can be automatically downloaded if tftp server at
192.168.1.2 have that file.
- the wifi led will be flashing when writing image.
Signed-off-by: Dongming Han <handongming@gl-inet.com>
Diffstat (limited to 'target/linux/mediatek/patches-4.9/0032-net-dsa-mediatek-add-support-for-GMAC2-wired-to-ext-.patch')
0 files changed, 0 insertions, 0 deletions