kernel: bump 5.4 to 5.4.163

Removed upstreamed:
 target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
 target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
 target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
 target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
 target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch

The following patch does not apply to upstream any more and needs some
more work to make it work fully again. I am not sure if we are still
able to set the UART to a none standard baud rate.
 target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch

These patches needed manually changes:
  target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch
  target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch
  target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
  target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
  target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

All others updated automatically.

Compile-tested on: malta/le, armvirt/64, lantiq/xrx200
Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 5 insertions, 5 deletions

diff --git a/target/linux/layerscape/patches-5.4/804-crypto-0020-MLKU-25-3-crypto-caam-add-Secure-Memory-support.patch b/target/linux/layerscape/patches-5.4/804-crypto-0020-MLKU-25-3-crypto-caam-add-Secure-Memory-support.patch
index 91f1cebd55..db0e256ded 100644
--- a/target/linux/layerscape/patches-5.4/804-crypto-0020-MLKU-25-3-crypto-caam-add-Secure-Memory-support.patch
+++ b/target/linux/layerscape/patches-5.4/804-crypto-0020-MLKU-25-3-crypto-caam-add-Secure-Memory-support.patch
@@ -261,7 +261,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  
 --- a/drivers/crypto/caam/regs.h
 +++ b/drivers/crypto/caam/regs.h
-@@ -382,6 +382,12 @@ struct version_regs {
+@@ -385,6 +385,12 @@ struct version_regs {
  #define CHA_VER_VID_MD_LP512	0x1ull
  #define CHA_VER_VID_MD_HP	0x2ull
  
@@ -274,7 +274,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  struct sec_vid {
  	u16 ip_id;
  	u8 maj_rev;
-@@ -412,17 +418,22 @@ struct caam_perfmon {
+@@ -415,17 +421,22 @@ struct caam_perfmon {
  #define CTPR_MS_PG_SZ_SHIFT	4
  	u32 comp_parms_ms;	/* CTPR - Compile Parameters Register	*/
  	u32 comp_parms_ls;	/* CTPR - Compile Parameters Register	*/
@@ -300,7 +300,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  
  	/* Component Instantiation Parameters			fe0-fff */
  	u32 rtic_id;		/* RVID - RTIC Version ID	*/
-@@ -441,6 +452,62 @@ struct caam_perfmon {
+@@ -444,6 +455,62 @@ struct caam_perfmon {
  	u32 caam_id_ls;		/* CAAMVID - CAAM Version ID LS	*/
  };
  
@@ -363,7 +363,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  /* LIODN programming for DMA configuration */
  #define MSTRID_LOCK_LIODN	0x80000000
  #define MSTRID_LOCK_MAKETRUSTED	0x00010000	/* only for JR masterid */
-@@ -645,6 +712,35 @@ struct caam_ctrl {
+@@ -648,6 +715,35 @@ struct caam_ctrl {
  #define JRSTART_JR2_START       0x00000004 /* Start Job ring 2 */
  #define JRSTART_JR3_START       0x00000008 /* Start Job ring 3 */
  
@@ -399,7 +399,7 @@ Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
  /*
   * caam_job_ring - direct job ring setup
   * 1-4 possible per instantiation, base + 1000/2000/3000/4000
-@@ -815,6 +911,62 @@ struct caam_job_ring {
+@@ -818,6 +914,62 @@ struct caam_job_ring {
  
  #define JRCR_RESET                  0x01