layerscape: add patches-5.4

Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release
which was tagged LSDK-20.04-V5.4.
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/

For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in
LSDK, port the dts patches from 4.14.

The patches are sorted into the following categories:
  301-arch-xxxx
  302-dts-xxxx
  303-core-xxxx
  701-net-xxxx
  801-audio-xxxx
  802-can-xxxx
  803-clock-xxxx
  804-crypto-xxxx
  805-display-xxxx
  806-dma-xxxx
  807-gpio-xxxx
  808-i2c-xxxx
  809-jailhouse-xxxx
  810-keys-xxxx
  811-kvm-xxxx
  812-pcie-xxxx
  813-pm-xxxx
  814-qe-xxxx
  815-sata-xxxx
  816-sdhc-xxxx
  817-spi-xxxx
  818-thermal-xxxx
  819-uart-xxxx
  820-usb-xxxx
  821-vfio-xxxx

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>

1 files changed, 54 insertions, 0 deletions

diff --git a/target/linux/layerscape/patches-5.4/701-net-0258-net-mscc-ocelot-adjust-MTU-on-the-CPU-port-in-NPI-mo.patch b/target/linux/layerscape/patches-5.4/701-net-0258-net-mscc-ocelot-adjust-MTU-on-the-CPU-port-in-NPI-mo.patch
new file mode 100644
index 0000000000..9adc0ffff5
--- /dev/null
+++ b/target/linux/layerscape/patches-5.4/701-net-0258-net-mscc-ocelot-adjust-MTU-on-the-CPU-port-in-NPI-mo.patch
@@ -0,0 +1,54 @@
+From b2f7c18c351737c2a053c39c09ef50870fd78c06 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Thu, 14 Nov 2019 17:03:25 +0200
+Subject: [PATCH] net: mscc: ocelot: adjust MTU on the CPU port in NPI mode
+
+When using the NPI port, the DSA tag is passed through Ethernet, so the
+switch's MAC needs to accept it as it comes from the DSA master. Increase
+the MTU on the external CPU port to account for the length of the
+injection header.
+
+Without this patch, MTU-sized frames are dropped by the switch's CPU
+port on xmit, which is especially obvious in TCP sessions.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/mscc/ocelot.c | 9 +++++++++
+ drivers/net/ethernet/mscc/ocelot.h | 2 ++
+ 2 files changed, 11 insertions(+)
+
+--- a/drivers/net/ethernet/mscc/ocelot.c
++++ b/drivers/net/ethernet/mscc/ocelot.c
+@@ -2234,9 +2234,18 @@ void ocelot_set_cpu_port(struct ocelot *
+ 	 * Only one port can be an NPI at the same time.
+ 	 */
+ 	if (cpu < ocelot->num_phys_ports) {
++		int mtu = VLAN_ETH_FRAME_LEN + OCELOT_TAG_LEN;
++
+ 		ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
+ 			     QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu),
+ 			     QSYS_EXT_CPU_CFG);
++
++		if (injection == OCELOT_TAG_PREFIX_SHORT)
++			mtu += OCELOT_SHORT_PREFIX_LEN;
++		else if (injection == OCELOT_TAG_PREFIX_LONG)
++			mtu += OCELOT_LONG_PREFIX_LEN;
++
++		ocelot_port_set_mtu(ocelot, cpu, mtu);
+ 	}
+ 
+ 	/* CPU port Injection/Extraction configuration */
+--- a/drivers/net/ethernet/mscc/ocelot.h
++++ b/drivers/net/ethernet/mscc/ocelot.h
+@@ -65,6 +65,8 @@ struct frame_info {
+ #define IFH_REW_OP_ORIGIN_PTP		0x5
+ 
+ #define OCELOT_TAG_LEN			16
++#define OCELOT_SHORT_PREFIX_LEN		4
++#define OCELOT_LONG_PREFIX_LEN		16
+ 
+ #define OCELOT_SPEED_2500 0
+ #define OCELOT_SPEED_1000 1