kernel: bump 5.4 to 5.4.179

Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
  This was already integrated in kernel v5.4-rc1, it was never needed.

* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175

target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.

target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")

Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 42 deletions

diff --git a/target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch b/target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
deleted file mode 100644
index d97837722c..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From d4c7270a63b1d78b89d91f74d782cce2a2bd9690 Mon Sep 17 00:00:00 2001
-From: Biwen Li <biwen.li@nxp.com>
-Date: Wed, 4 Sep 2019 11:39:30 +0800
-Subject: [PATCH] arm64: ls1028a-qds: correct bus of rtc
-
-The rtc is on i2c2 bus(hardware), not on i2c1 channel 3,
-so correct it
-
-Signed-off-by: Biwen Li <biwen.li@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 13 ++++++++-----
- 1 file changed, 8 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-@@ -169,11 +169,6 @@
- 				vcc-supply = <&sb_3v3>;
- 			};
- 
--			rtc@51 {
--				compatible = "nxp,pcf2129";
--				reg = <0x51>;
--			};
--
- 			eeprom@56 {
- 				compatible = "atmel,24c512";
- 				reg = <0x56>;
-@@ -217,6 +212,14 @@
- 
- };
- 
-+&i2c1 {
-+	status = "okay";
-+	rtc@51 {
-+		compatible = "nxp,pcf2129";
-+		reg = <0x51>;
-+	};
-+};
-+
- &enetc_port1 {
- 	phy-handle = <&qds_phy1>;
- 	phy-connection-type = "rgmii-id";