diff options
author | Thomas Nixon <tom@tomn.co.uk> | 2021-07-09 22:58:18 +0000 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-01-16 20:51:14 +0100 |
commit | 255268ce1a218a670e653dc5c83067f704164b7c (patch) | |
tree | c460ac7e5735dc241e508ad3abd214e6156540f7 /target/linux/lantiq/patches-5.10 | |
parent | 607f06f81cc630448484800e47830fbf0cbc1e24 (diff) | |
download | upstream-255268ce1a218a670e653dc5c83067f704164b7c.tar.gz upstream-255268ce1a218a670e653dc5c83067f704164b7c.tar.bz2 upstream-255268ce1a218a670e653dc5c83067f704164b7c.zip |
lantiq: xrx200: enable use of baby jumbo frames
xrx200 max MTU is reduced so that it works correctly when set to the
max, and the max MTU of the switch is increased to match.
In 5.10, the switch driver now enables non-standard MTUs on a per-port
basis, with the overall frame size set based on the cpu port. When the
MTU is not used, this should have no effect. The maximum packet size is
limited as large packets cause the switch to lock up.
0702-net-lantiq-add-support-for-jumbo-frames.patch comes from net-next
commit 998ac358019e491217e752bc6dcbb3afb2a6fa3e.
In 5.4, all switch ports are configured to accept the max MTU, as 5.4
does not have port_max_mtu/port_change_mtu callbacks.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
Diffstat (limited to 'target/linux/lantiq/patches-5.10')
6 files changed, 484 insertions, 12 deletions
diff --git a/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch b/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch new file mode 100644 index 0000000000..5bbf752dba --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch @@ -0,0 +1,145 @@ +From 998ac358019e491217e752bc6dcbb3afb2a6fa3e Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski <olek2@wp.pl> +Date: Sun, 19 Sep 2021 20:24:28 +0200 +Subject: [PATCH] net: lantiq: add support for jumbo frames + +Add support for jumbo frames. Full support for jumbo frames requires +changes in the DSA switch driver (lantiq_gswip.c). + +Tested on BT Hone Hub 5A. + +Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/lantiq_xrx200.c | 64 +++++++++++++++++++++++++--- + 1 file changed, 57 insertions(+), 7 deletions(-) + +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -14,13 +14,15 @@ + #include <linux/clk.h> + #include <linux/delay.h> + ++#include <linux/if_vlan.h> ++ + #include <linux/of_net.h> + #include <linux/of_platform.h> + + #include <xway_dma.h> + + /* DMA */ +-#define XRX200_DMA_DATA_LEN 0x600 ++#define XRX200_DMA_DATA_LEN (SZ_64K - 1) + #define XRX200_DMA_RX 0 + #define XRX200_DMA_TX 1 + +@@ -106,7 +108,8 @@ static void xrx200_flush_dma(struct xrx2 + break; + + desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | +- XRX200_DMA_DATA_LEN; ++ (ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ++ ETH_FCS_LEN); + ch->dma.desc++; + ch->dma.desc %= LTQ_DESC_NUM; + } +@@ -154,19 +157,20 @@ static int xrx200_close(struct net_devic + + static int xrx200_alloc_skb(struct xrx200_chan *ch) + { ++ int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; + struct sk_buff *skb = ch->skb[ch->dma.desc]; + dma_addr_t mapping; + int ret = 0; + + ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev, +- XRX200_DMA_DATA_LEN); ++ len); + if (!ch->skb[ch->dma.desc]) { + ret = -ENOMEM; + goto skip; + } + + mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data, +- XRX200_DMA_DATA_LEN, DMA_FROM_DEVICE); ++ len, DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) { + dev_kfree_skb_any(ch->skb[ch->dma.desc]); + ch->skb[ch->dma.desc] = skb; +@@ -179,8 +183,7 @@ static int xrx200_alloc_skb(struct xrx20 + wmb(); + skip: + ch->dma.desc_base[ch->dma.desc].ctl = +- LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | +- XRX200_DMA_DATA_LEN; ++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len; + + return ret; + } +@@ -340,10 +343,57 @@ err_drop: + return NETDEV_TX_OK; + } + ++static int ++xrx200_change_mtu(struct net_device *net_dev, int new_mtu) ++{ ++ struct xrx200_priv *priv = netdev_priv(net_dev); ++ struct xrx200_chan *ch_rx = &priv->chan_rx; ++ int old_mtu = net_dev->mtu; ++ bool running = false; ++ struct sk_buff *skb; ++ int curr_desc; ++ int ret = 0; ++ ++ net_dev->mtu = new_mtu; ++ ++ if (new_mtu <= old_mtu) ++ return ret; ++ ++ running = netif_running(net_dev); ++ if (running) { ++ napi_disable(&ch_rx->napi); ++ ltq_dma_close(&ch_rx->dma); ++ } ++ ++ xrx200_poll_rx(&ch_rx->napi, LTQ_DESC_NUM); ++ curr_desc = ch_rx->dma.desc; ++ ++ for (ch_rx->dma.desc = 0; ch_rx->dma.desc < LTQ_DESC_NUM; ++ ch_rx->dma.desc++) { ++ skb = ch_rx->skb[ch_rx->dma.desc]; ++ ret = xrx200_alloc_skb(ch_rx); ++ if (ret) { ++ net_dev->mtu = old_mtu; ++ break; ++ } ++ dev_kfree_skb_any(skb); ++ } ++ ++ ch_rx->dma.desc = curr_desc; ++ if (running) { ++ napi_enable(&ch_rx->napi); ++ ltq_dma_open(&ch_rx->dma); ++ ltq_dma_enable_irq(&ch_rx->dma); ++ } ++ ++ return ret; ++} ++ + static const struct net_device_ops xrx200_netdev_ops = { + .ndo_open = xrx200_open, + .ndo_stop = xrx200_close, + .ndo_start_xmit = xrx200_start_xmit, ++ .ndo_change_mtu = xrx200_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + }; +@@ -454,7 +504,7 @@ static int xrx200_probe(struct platform_ + net_dev->netdev_ops = &xrx200_netdev_ops; + SET_NETDEV_DEV(net_dev, dev); + net_dev->min_mtu = ETH_ZLEN; +- net_dev->max_mtu = XRX200_DMA_DATA_LEN; ++ net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN; + + /* load the memory ranges */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch new file mode 100644 index 0000000000..9ff0baed43 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch @@ -0,0 +1,101 @@ +From 24a43ae2ac0ea06c474b1c80dc75651294d49321 Mon Sep 17 00:00:00 2001 +From: Thomas Nixon <tom@tomn.co.uk> +Date: Sat, 2 Oct 2021 00:48:05 +0100 +Subject: [PATCH 2/2] net: lantiq: enable jumbo frames on GSWIP + +This enables non-standard MTUs on a per-port basis, with the overall +frame size set based on the CPU port. + +When the MTU is not changed, this should have no effect. + +Long packets crash the switch with MTUs of greater than 2526, so the +maximum is limited for now. + +Signed-off-by: Thomas Nixon <tom@tomn.co.uk> +--- + drivers/net/dsa/lantiq_gswip.c | 46 +++++++++++++++++++++++++++++++--- + 1 file changed, 42 insertions(+), 4 deletions(-) + +--- a/drivers/net/dsa/lantiq_gswip.c ++++ b/drivers/net/dsa/lantiq_gswip.c +@@ -238,6 +238,11 @@ + + #define XRX200_GPHY_FW_ALIGN (16 * 1024) + ++/* maximum packet size supported by the switch; in theory this should be 9600, ++ * but long packets currently cause lock-ups with an MTU of over 2526 ++ */ ++#define GSWIP_MAX_PACKET_LENGTH 2556 ++ + struct gswip_hw_info { + int max_ports; + int cpu_port; +@@ -851,10 +856,6 @@ static int gswip_setup(struct dsa_switch + gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, + GSWIP_PCE_PCTRL_0p(cpu_port)); + +- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, +- GSWIP_MAC_CTRL_2p(cpu_port)); +- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN, +- GSWIP_MAC_FLEN); + gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, + GSWIP_BM_QUEUE_GCTRL); + +@@ -871,6 +872,8 @@ static int gswip_setup(struct dsa_switch + return err; + } + ++ ds->mtu_enforcement_ingress = true; ++ + gswip_port_enable(ds, cpu_port, NULL); + return 0; + } +@@ -1433,6 +1436,39 @@ static int gswip_port_fdb_dump(struct ds + return 0; + } + ++static int gswip_port_max_mtu(struct dsa_switch *ds, int port) ++{ ++ /* includes 8 bytes for special header */ ++ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; ++} ++ ++static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) ++{ ++ struct gswip_priv *priv = ds->priv; ++ int cpu_port = priv->hw_info->cpu_port; ++ ++ /* cpu port always has maximum mtu of user ports, so use it to set ++ * switch frame size, including 8 byte special header ++ */ ++ if (port == cpu_port) { ++ new_mtu += 8; ++ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, ++ GSWIP_MAC_FLEN); ++ } ++ ++ /* enable MLEN for ports with non-standard MTUs, including the special ++ * header on the CPU port added above ++ */ ++ if (new_mtu != ETH_DATA_LEN) ++ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, ++ GSWIP_MAC_CTRL_2p(port)); ++ else ++ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, ++ GSWIP_MAC_CTRL_2p(port)); ++ ++ return 0; ++} ++ + static void gswip_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +@@ -1776,6 +1812,8 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, ++ .port_change_mtu = gswip_port_change_mtu, ++ .port_max_mtu = gswip_port_max_mtu, + .phylink_validate = gswip_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, diff --git a/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch b/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch new file mode 100644 index 0000000000..77c0eb6354 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch @@ -0,0 +1,122 @@ +From 1488fc204568f707fe2a42a913788c00a95af30e Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski <olek2@wp.pl> +Date: Fri, 17 Dec 2021 01:07:40 +0100 +Subject: [PATCH] net: lantiq_xrx200: increase buffer reservation + +If the user sets a lower mtu on the CPU port than on the switch, +then DMA inserts a few more bytes into the buffer than expected. +In the worst case, it may exceed the size of the buffer. The +experiments showed that the buffer should be a multiple of the +burst length value. This patch rounds the length of the rx buffer +upwards and fixes this bug. The reservation of FCS space in the +buffer has been removed as PMAC strips the FCS. + +Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames") +Reported-by: Thomas Nixon <tom@tomn.co.uk> +Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> +Signed-off-by: Jakub Kicinski <kuba@kernel.org> +--- + drivers/net/ethernet/lantiq_xrx200.c | 34 ++++++++++++++++++++-------- + 1 file changed, 24 insertions(+), 10 deletions(-) + +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -70,6 +70,8 @@ struct xrx200_priv { + struct xrx200_chan chan_tx; + struct xrx200_chan chan_rx; + ++ u16 rx_buf_size; ++ + struct net_device *net_dev; + struct device *dev; + +@@ -96,6 +98,16 @@ static void xrx200_pmac_mask(struct xrx2 + xrx200_pmac_w32(priv, val, offset); + } + ++static int xrx200_max_frame_len(int mtu) ++{ ++ return VLAN_ETH_HLEN + mtu; ++} ++ ++static int xrx200_buffer_size(int mtu) ++{ ++ return round_up(xrx200_max_frame_len(mtu), 4 * XRX200_DMA_BURST_LEN); ++} ++ + /* drop all the packets from the DMA ring */ + static void xrx200_flush_dma(struct xrx200_chan *ch) + { +@@ -108,8 +120,7 @@ static void xrx200_flush_dma(struct xrx2 + break; + + desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | +- (ch->priv->net_dev->mtu + VLAN_ETH_HLEN + +- ETH_FCS_LEN); ++ ch->priv->rx_buf_size; + ch->dma.desc++; + ch->dma.desc %= LTQ_DESC_NUM; + } +@@ -157,21 +168,21 @@ static int xrx200_close(struct net_devic + + static int xrx200_alloc_skb(struct xrx200_chan *ch) + { +- int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; + struct sk_buff *skb = ch->skb[ch->dma.desc]; ++ struct xrx200_priv *priv = ch->priv; + dma_addr_t mapping; + int ret = 0; + +- ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev, +- len); ++ ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(priv->net_dev, ++ priv->rx_buf_size); + if (!ch->skb[ch->dma.desc]) { + ret = -ENOMEM; + goto skip; + } + +- mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data, +- len, DMA_FROM_DEVICE); +- if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) { ++ mapping = dma_map_single(priv->dev, ch->skb[ch->dma.desc]->data, ++ priv->rx_buf_size, DMA_FROM_DEVICE); ++ if (unlikely(dma_mapping_error(priv->dev, mapping))) { + dev_kfree_skb_any(ch->skb[ch->dma.desc]); + ch->skb[ch->dma.desc] = skb; + ret = -ENOMEM; +@@ -183,7 +194,7 @@ static int xrx200_alloc_skb(struct xrx20 + wmb(); + skip: + ch->dma.desc_base[ch->dma.desc].ctl = +- LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len; ++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | priv->rx_buf_size; + + return ret; + } +@@ -355,6 +366,7 @@ xrx200_change_mtu(struct net_device *net + int ret = 0; + + net_dev->mtu = new_mtu; ++ priv->rx_buf_size = xrx200_buffer_size(new_mtu); + + if (new_mtu <= old_mtu) + return ret; +@@ -374,6 +386,7 @@ xrx200_change_mtu(struct net_device *net + ret = xrx200_alloc_skb(ch_rx); + if (ret) { + net_dev->mtu = old_mtu; ++ priv->rx_buf_size = xrx200_buffer_size(old_mtu); + break; + } + dev_kfree_skb_any(skb); +@@ -504,7 +517,8 @@ static int xrx200_probe(struct platform_ + net_dev->netdev_ops = &xrx200_netdev_ops; + SET_NETDEV_DEV(net_dev, dev); + net_dev->min_mtu = ETH_ZLEN; +- net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN; ++ net_dev->max_mtu = XRX200_DMA_DATA_LEN - xrx200_max_frame_len(0); ++ priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN); + + /* load the memory ranges */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch b/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch new file mode 100644 index 0000000000..f2c36952fc --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch @@ -0,0 +1,104 @@ +From c3e6b2c35b34214c58c1e90d65dab5f5393608e7 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski <olek2@wp.pl> +Date: Mon, 3 Jan 2022 20:43:16 +0100 +Subject: [PATCH] net: lantiq_xrx200: add ingress SG DMA support + +This patch adds support for scatter gather DMA. DMA in PMAC splits +the packet into several buffers when the MTU on the CPU port is +less than the MTU of the switch. The first buffer starts at an +offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the +offset. Thanks to this patch, the user can still connect to the +device in such a situation. For normal configurations, the patch +has no effect on performance. + +Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/lantiq_xrx200.c | 47 +++++++++++++++++++++++----- + 1 file changed, 40 insertions(+), 7 deletions(-) + +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -26,6 +26,9 @@ + #define XRX200_DMA_RX 0 + #define XRX200_DMA_TX 1 + ++#define XRX200_DMA_PACKET_COMPLETE 0 ++#define XRX200_DMA_PACKET_IN_PROGRESS 1 ++ + /* cpu port mac */ + #define PMAC_RX_IPG 0x0024 + #define PMAC_RX_IPG_MASK 0xf +@@ -61,6 +64,9 @@ struct xrx200_chan { + struct ltq_dma_channel dma; + struct sk_buff *skb[LTQ_DESC_NUM]; + ++ struct sk_buff *skb_head; ++ struct sk_buff *skb_tail; ++ + struct xrx200_priv *priv; + }; + +@@ -204,7 +210,8 @@ static int xrx200_hw_receive(struct xrx2 + struct xrx200_priv *priv = ch->priv; + struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; + struct sk_buff *skb = ch->skb[ch->dma.desc]; +- int len = (desc->ctl & LTQ_DMA_SIZE_MASK); ++ u32 ctl = desc->ctl; ++ int len = (ctl & LTQ_DMA_SIZE_MASK); + struct net_device *net_dev = priv->net_dev; + int ret; + +@@ -220,12 +227,36 @@ static int xrx200_hw_receive(struct xrx2 + } + + skb_put(skb, len); +- skb->protocol = eth_type_trans(skb, net_dev); +- netif_receive_skb(skb); +- net_dev->stats.rx_packets++; +- net_dev->stats.rx_bytes += len; + +- return 0; ++ /* add buffers to skb via skb->frag_list */ ++ if (ctl & LTQ_DMA_SOP) { ++ ch->skb_head = skb; ++ ch->skb_tail = skb; ++ } else if (ch->skb_head) { ++ if (ch->skb_head == ch->skb_tail) ++ skb_shinfo(ch->skb_tail)->frag_list = skb; ++ else ++ ch->skb_tail->next = skb; ++ ch->skb_tail = skb; ++ skb_reserve(ch->skb_tail, -NET_IP_ALIGN); ++ ch->skb_head->len += skb->len; ++ ch->skb_head->data_len += skb->len; ++ ch->skb_head->truesize += skb->truesize; ++ } ++ ++ if (ctl & LTQ_DMA_EOP) { ++ ch->skb_head->protocol = eth_type_trans(ch->skb_head, net_dev); ++ netif_receive_skb(ch->skb_head); ++ net_dev->stats.rx_packets++; ++ net_dev->stats.rx_bytes += ch->skb_head->len; ++ ch->skb_head = NULL; ++ ch->skb_tail = NULL; ++ ret = XRX200_DMA_PACKET_COMPLETE; ++ } else { ++ ret = XRX200_DMA_PACKET_IN_PROGRESS; ++ } ++ ++ return ret; + } + + static int xrx200_poll_rx(struct napi_struct *napi, int budget) +@@ -240,7 +271,9 @@ static int xrx200_poll_rx(struct napi_st + + if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { + ret = xrx200_hw_receive(ch); +- if (ret) ++ if (ret == XRX200_DMA_PACKET_IN_PROGRESS) ++ continue; ++ if (ret != XRX200_DMA_PACKET_COMPLETE) + return ret; + rx++; + } else { diff --git a/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch b/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch index bf3b903616..4fb7d0767b 100644 --- a/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch +++ b/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch @@ -75,7 +75,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> priv->txch.netdev = dev; --- a/drivers/net/ethernet/lantiq_xrx200.c +++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -71,6 +71,9 @@ struct xrx200_priv { +@@ -81,6 +81,9 @@ struct xrx200_priv { struct net_device *net_dev; struct device *dev; @@ -85,7 +85,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> __iomem void *pmac_reg; }; -@@ -316,8 +319,8 @@ static netdev_tx_t xrx200_start_xmit(str +@@ -363,8 +366,8 @@ static netdev_tx_t xrx200_start_xmit(str if (unlikely(dma_mapping_error(priv->dev, mapping))) goto err_drop; @@ -96,7 +96,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> desc->addr = mapping - byte_offset; /* Make sure the address is written before we give it to HW */ -@@ -369,7 +372,7 @@ static int xrx200_dma_init(struct xrx200 +@@ -465,7 +468,7 @@ static int xrx200_dma_init(struct xrx200 int ret = 0; int i; @@ -105,7 +105,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> ch_rx->dma.nr = XRX200_DMA_RX; ch_rx->dma.dev = priv->dev; -@@ -487,6 +490,18 @@ static int xrx200_probe(struct platform_ +@@ -584,6 +587,18 @@ static int xrx200_probe(struct platform_ if (err) eth_hw_addr_random(net_dev); diff --git a/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch b/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch index 0b68179a48..7448af8c26 100644 --- a/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch +++ b/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch @@ -15,15 +15,15 @@ Signed-off-by: David S. Miller <davem@davemloft.net> --- a/drivers/net/ethernet/lantiq_xrx200.c +++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -23,6 +23,7 @@ - #define XRX200_DMA_DATA_LEN 0x600 +@@ -25,6 +25,7 @@ + #define XRX200_DMA_DATA_LEN (SZ_64K - 1) #define XRX200_DMA_RX 0 #define XRX200_DMA_TX 1 +#define XRX200_DMA_BURST_LEN 8 - /* cpu port mac */ - #define PMAC_RX_IPG 0x0024 -@@ -71,9 +72,6 @@ struct xrx200_priv { + #define XRX200_DMA_PACKET_COMPLETE 0 + #define XRX200_DMA_PACKET_IN_PROGRESS 1 +@@ -81,9 +82,6 @@ struct xrx200_priv { struct net_device *net_dev; struct device *dev; @@ -33,7 +33,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> __iomem void *pmac_reg; }; -@@ -320,7 +318,7 @@ static netdev_tx_t xrx200_start_xmit(str +@@ -367,7 +365,7 @@ static netdev_tx_t xrx200_start_xmit(str goto err_drop; /* dma needs to start on a burst length value aligned address */ @@ -42,7 +42,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> desc->addr = mapping - byte_offset; /* Make sure the address is written before we give it to HW */ -@@ -372,7 +370,8 @@ static int xrx200_dma_init(struct xrx200 +@@ -468,7 +466,8 @@ static int xrx200_dma_init(struct xrx200 int ret = 0; int i; @@ -52,7 +52,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> ch_rx->dma.nr = XRX200_DMA_RX; ch_rx->dma.dev = priv->dev; -@@ -490,18 +489,6 @@ static int xrx200_probe(struct platform_ +@@ -587,18 +586,6 @@ static int xrx200_probe(struct platform_ if (err) eth_hw_addr_random(net_dev); |