lantiq: copy target to kernel 5.4

Duplicate kernel 4.19 config and patches for kernel 5.4.

Duplicate the devicetree source files as well, they need kernel 5.4
specific adjustments.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 200 deletions

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
deleted file mode 100644
index dcae06d894..0000000000
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv4518pwr01.dtsi
+++ /dev/null
@@ -1,200 +0,0 @@
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-
-		led-dsl = &dsl;
-		led-internet = &online;
-		led-usb = &led_usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	ath5k_eep {
-		compatible = "ath5k,eeprom";
-		ath,eep-flash = <&boardconfig 0x400>;
-		ath,mac-offset = <0x16>;
-		ath,mac-increment = <1>;
-		ath,eep-swap;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "power";
-			gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		dsl: dsl {
-			label = "dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "online";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "wifi";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		dsl2 {
-			label = "dsl2";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		led_usb: usb {
-			label = "usb";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "voice";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-		};
-		fxs1 {
-			label = "fxs1";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "fxs2";
-			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-		};
-		fxo {
-			label = "fxo";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		ebu {
-			lantiq,groups = "ebu cs1";
-			lantiq,function = "ebu";
-		};
-	};
-};
-
-&gsw {
-	phy-mode = "mii";
-	mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-	flash@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x2000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x00000 0x10000>; /* 64 KB */
-				read-only;
-			};
-
-			partition@10000 {
-				label = "uboot_env";
-				reg = <0x10000 0x10000>; /* 64 KB */
-				read-only;
-			};
-
-			partition@20000 {
-				label = "firmware";
-				reg = <0x20000 0x3d0000>;
-			};
-
-			boardconfig: partition@400000 {
-				label = "boardconfig";
-				reg = <0x3f0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-
-	gpiomm: gpio@1 {
-		compatible = "lantiq,gpio-mm";
-		reg = <1 0x0 0x10 >;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		lantiq,shadow = <0x0>;
-	};
-};
-
-&pci0 {
-	status = "okay";
-
-	pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
-		    <&pci_req1_pins>, <&pci_req2_pins>;
-	pinctrl-names = "default";
-
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-	req-mask = <0xf>;
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-	vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
-	status = "okay";
-	gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};