lantiq: copy target to kernel 5.4

Duplicate kernel 4.19 config and patches for kernel 5.4.

Duplicate the devicetree source files as well, they need kernel 5.4
specific adjustments.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 151 deletions

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
deleted file mode 100644
index 424b778bb4..0000000000
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
-	model = "AVM FRITZ!Box 7320";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-
-		led-dsl = &info_green;
-		led-wifi = &wlan;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		dect {
-			label = "dect";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "fritz7320:green:power";
-			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		voice {
-			label = "fritz7320:green:fon";
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-		dect {
-			label = "fritz7320:green:dect";
-			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		};
-		wlan: wlan {
-			label = "fritz7320:green:wlan";
-			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-		info_green: info_green {
-			label = "fritz7320:green:info";
-			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-		};
-		info_red {
-			label = "fritz7320:red:info";
-			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gsw {
-	phy-mode = "mii";
-	mtd-mac-address = <&ath9k_cal 0xa91>;
-	mtd-mac-address-increment = <(-2)>;
-};
-
-&localbus {
-	flash@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x1000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ath9k_cal: partition@0 {
-				label = "urlader";
-				reg = <0x00000 0x20000>;
-				read-only;
-			};
-
-			partition@20000 {
-				label = "firmware";
-				reg = <0x20000 0xf60000>;
-			};
-
-			partition@f80000 {
-				label = "tffs (1)";
-				reg = <0xf80000 0x40000>;
-				read-only;
-			};
-
-			partition@fc0000 {
-				label = "tffs (2)";
-				reg = <0xfc0000 0x40000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-
-	pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
-		    <&pci_gnt3_pins>, <&pci_gnt4_pins>,
-		    <&pci_req1_pins>, <&pci_req2_pins>,
-		    <&pci_req3_pins>, <&pci_req4_pins>;
-
-	req-mask = <0xf>;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@0,0 {
-		compatible = "pci0,0";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-	};
-};
-
-&usb_phy0 {
-	status = "okay";
-};
-
-&usb_phy1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};