lantiq: use soc_vendor_device scheme on DTS file

This renames lantiq DTS(I) files to follow soc_vendor_device scheme.
This will make DTS files easier to maintain.

As a side effect, DTS file name can be derived from device node
names now, only having to specify a SOC variable in Makefiles.

While at it, move files to arch/mips/boot/dts/lantiq subfolder.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 178 deletions

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/P2601HNFX.dts b/target/linux/lantiq/files/arch/mips/boot/dts/P2601HNFX.dts
deleted file mode 100644
index 79896c6478..0000000000
--- a/target/linux/lantiq/files/arch/mips/boot/dts/P2601HNFX.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
-	model = "ZyXEL P-2601HN-Fx";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &online;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "p2601hnfx:green:power";
-			gpios = <&stp 11 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "p2601hnfx:red:power";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "p2601hnfx:green:internet";
-			gpios = <&stp 13 GPIO_ACTIVE_LOW>;
-		};
-		online2 {
-			label = "p2601hnfx:red:internet";
-			gpios = <&stp 12 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "p2601hnfx:green:dsl";
-			gpios = <&stp 14 GPIO_ACTIVE_LOW>;
-		};
-		phone {
-			label = "p2601hnfx:green:phone";
-			gpios = <&stp 9 GPIO_ACTIVE_LOW>;
-		};
-		phone2 {
-			label = "p2601hnfx:orange:phone";
-			gpios = <&stp 8 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "p2601hnfx:green:wireless";
-			gpios = <&stp 15 GPIO_ACTIVE_LOW>;
-		};
-		wifi2 {
-			label = "p2601hnfx:orange:wireless";
-			gpios = <&stp 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		switch {
-			gpio-export,name = "switch";
-			gpio-export,output = <1>;
-			gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		exin {
-			lantiq,groups = "exin1";
-			lantiq,function = "exin";
-		};
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&gsw {
-	phy-mode = "rmii";
-};
-
-&localbus {
-	flash@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x2000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x00000 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "uboot_env";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "firmware";
-				reg = <0x60000 0xfa0000>;
-			};
-		};
-	};
-};
-
-&pci0 {
-	pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
-	pinctrl-names = "default";
-};
-
-&stp {
-	status = "okay";
-	lantiq,shadow = <0xfff>;
-	lantiq,groups = <0x3>;
-};
-
-&usb_phy0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	vbus-supply = <&usb_vbus>;
-};