lantiq: switch to kernel 4.14

Use kernel 4.14 by default.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 288 deletions

diff --git a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/FRITZ3370.dts b/target/linux/lantiq/files-4.9/arch/mips/boot/dts/FRITZ3370.dts
deleted file mode 100644
index ef3655de61..0000000000
--- a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/FRITZ3370.dts
+++ /dev/null
@@ -1,288 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9";
-	model = "Fritz!Box WLAN 3370";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &info_green;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x8000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nand-parts@0 {
-				compatible = "lantiq,nand-xway";
-				bank-width = <2>;
-				reg = <1 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "kernel";
-						reg = <0x0 0x400000>;
-					};
-
-					partition@400000 {
-						label = "rootfs_ubi";
-						reg = <0x400000 0x3000000>;
-					};
-
-					partition@3400000 {
-						label = "vr9_firmware";
-						reg = <0x3400000 0x400000>;
-					};
-					partition@3800000 {
-						label = "reserved";
-						reg = <0x3800000 0x3000000>;
-					};
-					partition@6800000 {
-						label = "config";
-						reg = <0x6800000 0x200000>;
-					};
-					partition@6a00000 {
-						label = "nand-filesystem";
-						reg = <0x6a00000 0x1600000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				nand {
-					lantiq,groups = "nand cle", "nand ale",
-							"nand rd", "nand cs1", "nand rdy";
-					lantiq,function = "ebu";
-					lantiq,pull = <1>;
-				};
-				phy-rst {
-					lantiq,pins = "io37", "io44";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 5 GPIO_ACTIVE_HIGH
-				&gpio 14 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/xrx200_phy11g_a14.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		power {
-			label = "power";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-		};
-/*		wifi {
-			label = "wifi";
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-			linux,code = <BTN_1>;
-		};*/
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "fritz3370:green:power";
-			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "fritz3370:red:power";
-			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-		};
-		info_red {
-			label = "fritz3370:red:info";
-			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "fritz3370:green:wlan";
-			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "fritz3370:green:dsl";
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-		};
-		lan {
-			label = "fritz3370:green:lan";
-			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		};
-		info_green: info_green {
-			label = "fritz3370:green:info";
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <1000000>;
-
-		urlader: partition@0 {
-			reg = <0x0 0x20000>;
-			label = "urlader";
-			read-only;
-		};
-
-		partition@20000 {
-			reg = <0x20000 0x10000>;
-			label = "tffs (1)";
-			read-only;
-		};
-
-		partition@30000 {
-			reg = <0x30000 0x10000>;
-			label = "tffs (2)";
-			read-only;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&urlader 0x987>;
-		mtd-mac-address-increment = <(-2)>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-			gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-			gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-&pcie0 {
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-
-		wifi@0,0 {
-			compatible = "pci0,0";
-			reg = <0 0 0 0 0>;
-			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
-		};
-	};
-};