lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 282 insertions, 0 deletions

diff --git a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/files-4.9/arch/mips/boot/dts/BTHOMEHUBV5A.dts
new file mode 100644
index 0000000000..2f75074696
--- /dev/null
+++ b/target/linux/lantiq/files-4.9/arch/mips/boot/dts/BTHOMEHUBV5A.dts
@@ -0,0 +1,282 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
+	model = "BT Home Hub 5A";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_blue;
+
+		led-dsl = &broadband_blue;
+		led-wifi = &wireless_blue;
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nand-parts@0 {
+				compatible = "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <0x1 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <3>;
+				nand-ecc-step-size = <256>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "u-boot";
+						reg = <0x0 0xa0000>;
+						read-only;
+					};
+					partition@a0000 {
+						label = "uboot-env";
+						reg = <0xa0000 0x20000>;
+						read-only;
+					};
+					partition@c0000 {
+						label = "unused";
+						reg = <0xc0000 0x40000>;
+					};
+					partition@100000 {
+						label = "ubi";
+						reg = <0x100000 0x7e80000>;
+					};
+					/*
+					 * last 512 KiB are for the bad block table, not writable
+					 */
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,output = <1>;
+					lantiq,open-drain;
+				};
+				pcie_rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+					lantiq,open-drain;
+				};
+				usb_vbus {
+					lantiq,pins = "io33";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				nand_out {
+					lantiq,groups = "nand cle", "nand ale";
+					lantiq,function = "ebu";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				nand_cs1 {
+					lantiq,groups = "nand cs1";
+					lantiq,function = "ebu";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		restart {
+			label = "restart";
+			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/* broadband-* is a single RGB led */
+		broadband-red {
+			label = "bthomehubv5a:red:broadband";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		};
+		broadband-green {
+			label = "bthomehubv5a:green:broadband";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+		broadband_blue: broadband-blue {
+			label = "bthomehubv5a:blue:broadband";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		/* wireless-* is a single RGB led */
+		wireless-red {
+			label = "bthomehubv5a:red:wireless";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+		wireless-green {
+			label = "bthomehubv5a:green:wireless";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+		wireless_blue: wireless-blue {
+			label = "bthomehubv5a:blue:wireless";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		/* power-* is a single RGB led */
+		power_red: power-red {
+			label = "bthomehubv5a:red:power";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+		power_green: power-green {
+			label = "bthomehubv5a:green:power";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_blue: power-blue {
+			label = "bthomehubv5a:blue:power";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		dimmed {
+			label = "dimmed";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,002d {
+		compatible = "pci168c,002d";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+		qca,disable-5ghz;
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+		};
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@5 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy5: ethernet-phy@5 {
+			reg = <0x5>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};