lantiq: switch from uci-defaults to board.d

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47755

2 files changed, 0 insertions, 288 deletions

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
deleted file mode 100644
index b9e5420f07..0000000000
--- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2011 OpenWrt.org
-# based on ar71xx
-#
-
-. /lib/functions/uci-defaults.sh
-. /lib/functions/lantiq.sh
-
-[ -e "/sys/class/leds/wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0tpt"
-[ -e "/sys/class/leds/usb" ] && ucidef_set_led_usbdev "usb" "usb" "usb" "1-1"
-[ -e "/sys/class/leds/usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "usb2" "2-1"
-[ -e "/sys/class/leds/internet" ] && ucidef_set_led_netdev "internet" "internet" "internet" "pppoe-wan"
-
-board=$(lantiq_board_name)
-
-case "$board" in
-VG3503J)
-	ucidef_set_led_netdev "vdsl" "vdsl" "bt:green:dsl" "ptm0"
-	;;
-BTHOMEHUBV2B)
-	ucidef_set_led_default "power" "power" "soc:blue:power" "1"
-#	ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0radio"
-	ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
-	ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
-	ucidef_set_led_usbdev "usb" "usb" "soc:blue:phone" "1-1"
-	;;
-BTHOMEHUBV3A|BTHOMEHUBV5A)
-	ucidef_set_led_default "power" "power" "soc:blue:power" "1"
-	ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
-	ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
-	;;
-VGV7510KW22)
-	ucidef_set_led_default "power" "power" "power" "1"
-	ucidef_set_led_default "power2" "power2" "power2" "0"
-	ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0radio"
-	ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
-	ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
-	;;
-VGV7519)
-	ucidef_set_led_default "power" "power" "power" "0"
-	ucidef_set_led_default "power2" "power2" "power2" "1"
-	ucidef_set_led_wlan "wireless_yellow" "wireless_yellow" "wireless_yellow" "phy0radio"
-	ucidef_set_led_netdev "internet_yellow" "internet_yellow" "internet_yellow" "nas0"
-	ucidef_set_led_netdev "broadband_yellow" "broadband_yellow" "broadband_yellow" "pppoe-wan"
-	;;
-P2812HNUF*)
-	ucidef_set_led_default "power" "power" "power" "0"
-	ucidef_set_led_default "power2" "power2" "power2" "1"
-	ucidef_set_led_wlan "wireless_green" "wireless_green" "wireless_green" "phy0radio"
-	ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
-	ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
-	;;
-ARV7519RW22)
-	ucidef_set_led_default "power" "power" "power" "1"
-	ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
-	ucidef_set_led_netdev "lan" "lan" "lan" "eth0.1"
-	;;
-ARV8539PW22)
-        ucidef_set_led_default "power" "power" "soc:green:power" "1"
-        ucidef_set_led_default "power2" "power2" "soc:red:power" "0"
-        ucidef_set_led_wlan "wifi" "wifi" "soc:green:wireless" "phy0tpt"
-        ucidef_set_led_netdev "dsl" "dsl" "soc:green:dsl" "nas0"
-        ucidef_set_led_netdev "online" "online" "soc:green:online" "pppoe-wan"
-        ;;
-*)
-	;;
-esac
-
-for a in `ls /sys/class/leds/`; do
-	grep -q "\[none\]" /sys/class/leds/$a/trigger
-	[ $? -eq 0 ] && ucidef_set_led_default $a $a $a `cat /sys/class/leds/$a/brightness`
-done
-
-ucidef_commit_leds
-
-exit 0
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
deleted file mode 100644
index b22060c414..0000000000
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ /dev/null
@@ -1,211 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2011-2012 OpenWrt.org
-#
-
-[ -e /etc/config/network ] && exit 0
-
-set_atm_wan() {
-	local vpi=$1
-	local vci=$2
-	local encaps=$3
-	local payload=$4
-	uci batch <<EOF
-set network.atm='atm-bridge'
-set network.atm.vpi='$vpi'
-set network.atm.vci='$vci'
-set network.atm.encaps='$encaps'
-set network.atm.payload='$payload'
-set network.wan='interface'
-set network.wan.ifname='nas0'
-set network.wan.proto='pppoe'
-set network.wan.username='foo'
-set network.wan.password='bar'
-set network.wan.ipv6='1'
-set network.wan6='interface'
-set network.wan6.ifname='@wan'
-set network.wan6.proto='dhcpv6'
-EOF
-}
-
-set_adsl_modem() {
-	local annex=$1
-	local firmware=$2
-	uci batch <<EOF
-set network.dsl='adsl'
-set network.dsl.annex='$annex'
-set network.dsl.firmware='$firmware'
-EOF
-}
-
-set_vdsl_modem() {
-	local annex=$1
-	local firmware=$2
-	local tone=$3
-	local xfer_mode=$4
-	uci batch <<EOF
-set network.dsl='vdsl'
-set network.dsl.annex='$annex'
-set network.dsl.firmware='$firmware'
-set network.dsl.tone='$tone'
-set network.dsl.xfer_mode='$xfer_mode'
-EOF
-}
-
-. /lib/functions/uci-defaults.sh
-. /lib/functions/lantiq.sh
-
-touch /etc/config/network
-
-ucidef_set_interface_loopback
-ucidef_set_interface_lan 'eth0'
-
-vpi=1
-vci=32
-annex="a"
-encaps="llc"
-payload="bridged"
-lan_mac=""
-wan_mac=""
-
-board=$(lantiq_board_name)
-
-case "$board" in
-# adm6996
-ARV4510PW)
-	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
-	;;
-
-ARV4520PW)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
-	;;
-
-ACMP252|GIGASX76X)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "4 3 2 1 5t"
-	;;
-
-# ar8316
-ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
-	;;
-
-# rtl8306g
-ARV7519PW)
-	lan_mac=$(mtd_get_mac_binary board_config 22)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t"
-	;;
-
-WBMR)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
-	;;
-
-VG3503J)
-	ucidef_set_interface_lan 'eth0'
-	uci set network.lan.type='none'
-	;;
-
-DGN3500*)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
-	;;
-
-GR7000)
-	ucidef_set_interface_wan "eth0"
-	uci set network.lan.ifname=''
-	;;
-
-H201L)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t"
-	;;
-
-#rtl8306g
-P2601HNFX)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
-	;;
-
-P2812HNUF*)
-	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan 'eth0.1'
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t"
-	;;
-
-TDW8970|TDW8980)
-	lan_mac=$(mtd_get_mac_binary boardconfig 61696)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan 'eth0.1'
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0 2 4 5 6t"
-	;;
-
-ARV7519RW22)
-	lan_mac=$(mtd_get_mac_binary boardconfig 22)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan "eth0.1"
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5 6t"
-	;;
-
-BTHOMEHUBV2B|BTHOMEHUBV3A)
-	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	;;
-
-BTHOMEHUBV5A)
-	lan_mac=$(mtd_get_mac_binary caldata 4364)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan 'eth0.1'
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 6t"
-	;;
-
-VGV7519)
-	lan_mac=$(mtd_get_mac_binary board_config 22)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	;;
-
-VGV7510KW22)
-	lan_mac=$(mtd_get_mac_binary board_config 22)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan 'eth0.1'
-	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6t"
-	;;
-
-esac
-
-[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
-
-if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then
-	set_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm"
-else
-	set_adsl_modem "$annex" "/lib/firmware/adsl.bin"
-fi
-
-[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
-[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
-
-uci commit network
-
-exit 0