aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2021-07-21 14:24:52 +0200
committerChristian Lamparter <chunkeey@gmail.com>2021-12-29 20:35:57 +0100
commitafd7ec3b57c3ff66f0a8ed250ed468e23cc9cb27 (patch)
treef04ddd1d8010fd47497a976fa90c54bc4e4e5039 /target/linux/kirkwood
parent4e46ae1f69b5ff1cf09b2e2eee69a7c38a00202d (diff)
downloadupstream-afd7ec3b57c3ff66f0a8ed250ed468e23cc9cb27.tar.gz
upstream-afd7ec3b57c3ff66f0a8ed250ed468e23cc9cb27.tar.bz2
upstream-afd7ec3b57c3ff66f0a8ed250ed468e23cc9cb27.zip
kirkwood: add support for two clones from Endian
They are Endian 4i Edge 200 and his clone Endian UTM Mini. Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 512MB (Micron 29F4G08AAC) - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2) - Lan 5: 1x GBE (Marvell 88E1116R-NNC1) - Storage: MicroSD Slot - WLAN: MiniPCIe Slot present, and fitted with SparkLan WPEA-110N/E (Atheros AR9280 chipset) (ONLY Endian UTM Mini WLAN) - USB: 1x USB 2.0 port - Console: RJ-45 port - LEDs: 3x GPIO controlled Notes: - WLAN led (Endian UTM Mini) is drived by MPCIE card Installation by TFTP + serial: - Setup TFTP server and copy initramfs image - Connect serial console - Stop booting in u-boot - Do: setenv bootargs 'console=ttyS0,115200n8 earlyprintk' saveenv setenv serverip 192.168.1.1 setenv ipaddr 192.168.1.2 tftpboot 0x1200000 openwrt-kirkwood-endian_4i-edge-200-initramfs-uImage bootm 0x1200000 - copy sysupgrade image via ssh. - run sysupgrade Installation by USB + serial: - Copy initramfs image to fat32 usb drive - Connect pendrive to USB 2.0 front socket - Connect serial console - Stop booting in u-boot - Do: setenv bootargs 'console=ttyS0,115200n8 earlyprintk' saveenv usb reset fatload usb 0:1 0x1200000 openwrt-kirkwood-endian_4i-edge-200-initramfs-uImage bootm 0x1200000 - copy sysupgrade image via ssh. - run sysupgrade Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/kirkwood')
-rw-r--r--target/linux/kirkwood/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac8
-rw-r--r--target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts219
-rw-r--r--target/linux/kirkwood/image/Makefile11
4 files changed, 241 insertions, 0 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
index 972ee68fba..ebc70cfc2f 100644
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -31,6 +31,9 @@ seagate,goflexnet|\
zyxel,nsa310s)
ucidef_set_interface_lan "eth0" "dhcp"
;;
+endian,4i-edge-200)
+ ucidef_set_interface_lan "port1 port2 port3 port4 eth1"
+ ;;
linksys,e4200-v2|\
linksys,ea3500|\
linksys,ea4500)
diff --git a/target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac b/target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac
index 75e9e886d9..2a52b7962f 100644
--- a/target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac
+++ b/target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac
@@ -19,6 +19,14 @@ preinit_set_mac_address() {
ip link set dev dmz address $(macaddr_add $mac 8) 2>/dev/null
ip link set dev dsl address $(macaddr_add $mac 9) 2>/dev/null
;;
+ endian,4i-edge-200)
+ mac=$(cat /sys/class/net/eth0/address)
+
+ ip link set dev port1 address $mac 2>/dev/null
+ ip link set dev port2 address $(macaddr_add $mac 1) 2>/dev/null
+ ip link set dev port3 address $(macaddr_add $mac 2) 2>/dev/null
+ ip link set dev port4 address $(macaddr_add $mac 3) 2>/dev/null
+ ;;
esac
}
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
new file mode 100644
index 0000000000..143dac97fe
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "Endian 4i Edge 200";
+ compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_orange;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_orange;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led49 &pmx_led35 &pmx_led34>;
+ pinctrl-names = "default";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_orange: status_orange {
+ label = "orange:status";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ sdcard {
+ label = "orange:sdcard";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+};
+
+&eth0port {
+ speed = <1000>;
+ duplex = <1>;
+};
+
+&eth1 {
+ status = "okay";
+};
+
+&eth1port {
+ phy-handle = <&ethphyb>;
+};
+
+&mdio {
+ status = "okay";
+
+ ethphyb: ethernet-phy@b {
+ reg = <0x0b>;
+
+ marvell,reg-init =
+ /* link-activity, bi-color mode 4 */
+ <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+ };
+
+ switch0: switch@11 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x11>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "port1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "port2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "port3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "port4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ phy-mode = "rgmii-id";
+ ethernet = <&eth0port>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000a0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "u-boot-env";
+ reg = <0x000a0000 0x00060000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "kernel";
+ reg = <0x00100000 0x00400000>;
+ };
+
+ partition@500000 {
+ label = "ubi";
+ reg = <0x00500000 0x1fb00000>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_sysrst>;
+ pinctrl-names = "default";
+
+ pmx_sysrst: pmx-sysrst {
+ marvell,pins = "mpp6";
+ marvell,function = "sysrst";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led34: pmx_led34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ pmx_led35: pmx_led35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ pmx_led49: pmx_led49 {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata_phy0 {
+ status = "disabled";
+};
+
+&sata_phy1 {
+ status = "disabled";
+};
+
+&sdio {
+ pinctrl-0 = <&pmx_sdio_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile
index eb3d684c80..4a2ca8d68e 100644
--- a/target/linux/kirkwood/image/Makefile
+++ b/target/linux/kirkwood/image/Makefile
@@ -140,6 +140,17 @@ define Device/ctera_c200-v1
endef
TARGET_DEVICES += ctera_c200-v1
+define Device/endian_4i-edge-200
+ DEVICE_VENDOR := Endian
+ DEVICE_MODEL := 4i Edge 200
+ DEVICE_ALT0_VENDOR := Endian
+ DEVICE_ALT0_MODEL := UTM Mini Firewall
+ DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-wolfssl
+ KERNEL_SIZE := 4096k
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += endian_4i-edge-200
+
define Device/globalscale_sheevaplug
DEVICE_VENDOR := Globalscale
DEVICE_MODEL := Sheevaplug