kirkwood: drop kernel 5.4 support

It has been 3 months since we switched this target to 5.10, now we can
remove the 5.4 files.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>

1 files changed, 0 insertions, 67 deletions

diff --git a/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch
deleted file mode 100644
index 9313b4bc3e..0000000000
--- a/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -8,6 +8,13 @@
- 	model = "Iomega StorCenter ix2-200";
- 	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_health;
-+		led-running = &led_power;
-+		led-upgrade = &led_health;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x00000000 0x10000000>;
-@@ -127,16 +134,16 @@
- 			      &pmx_led_rebuild &pmx_led_health >;
- 		pinctrl-names = "default";
- 
--		power_led {
-+		led_power: power_led {
- 			label = "status:white:power_led";
- 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
--			default-state = "keep";
-+			default-state = "on";
- 		};
- 		rebuild_led {
- 			label = "status:white:rebuild_led";
- 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- 		};
--		health_led {
-+		led_health: health_led {
- 			label = "status:red:health_led";
- 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- 		};
-@@ -186,18 +193,18 @@
- 	};
- 
- 	partition@a0000 {
--		label = "env";
-+		label = "u-boot environment";
- 		reg = <0xa0000 0x20000>;
- 		read-only;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
-+		label = "kernel";
- 		reg = <0x100000 0x300000>;
- 	};
- 
- 	partition@400000 {
--		label = "rootfs";
-+		label = "ubi";
- 		reg = <0x400000 0x1C00000>;
- 	};
- };
-@@ -211,7 +218,7 @@
- };
- 
- &eth0 {
--	status = "okay";
-+	status = "disabled";
- 	ethernet0-port@0 {
- 		speed = <1000>;
- 		duplex = <1>;