diff options
author | Matthew Hagan <mnhagan88@gmail.com> | 2022-01-29 09:03:11 +0900 |
---|---|---|
committer | Robert Marko <robimarko@gmail.com> | 2023-01-16 12:42:23 +0100 |
commit | 6e03304c76aee6fc5c3139f4af8c24665ec7f89b (patch) | |
tree | 71430e0abc38cc2d13b65808f591c68abe25ea9a /target/linux/ipq807x/base-files/etc/board.d/01_leds | |
parent | 2ddb2057cdf4a08fd2abb8c09d02e28a2d14f406 (diff) | |
download | upstream-6e03304c76aee6fc5c3139f4af8c24665ec7f89b.tar.gz upstream-6e03304c76aee6fc5c3139f4af8c24665ec7f89b.tar.bz2 upstream-6e03304c76aee6fc5c3139f4af8c24665ec7f89b.zip |
ipq807x: add Edgecore EAP102
The Edgecore EAP102 is a wall/ceiling mountable AP. The AP can be
powered by either PoE or AC adapter.
Device info:
- IPQ8071-A SoC
- 1GiB RAM
- 256MiB NAND flash
- 32MiB SPI NOR
- 2 Ethernet ports
- 1 Console port
- 2GHz/5GHz AX WLAN
- 2 USB 2.0 ports
Install instructions:
Prerequistes - TFTP server, preferrably within 192.168.1.0/24
Console cable plugged in (115200 8N1 no flow control)
1. Power on device and interrupt u-boot to obtain u-boot CLI
2. set serverip to IP address of the TFTP server:
`setenv serverip 192.168.1.250`
3. Download image from TFTP server:
`tftpboot 0x44000000 openwrt-ipq807x-generic-edgecore_eap102-squashfs-nand-factory.ubi`
4. Flash ubi image to both partitions and reset:
`sf probe
imxtract 0x44000000 ubi
nand device 0
nand erase 0x0 0x3400000
nand erase 0x3c00000 0x3400000
nand write $fileaddr 0x0 $filesize
nand write $fileaddr 0x3c00000 $filesize
reset`
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Diffstat (limited to 'target/linux/ipq807x/base-files/etc/board.d/01_leds')
-rw-r--r-- | target/linux/ipq807x/base-files/etc/board.d/01_leds | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ipq807x/base-files/etc/board.d/01_leds b/target/linux/ipq807x/base-files/etc/board.d/01_leds index f0a2bdd7bb..0424958416 100644 --- a/target/linux/ipq807x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq807x/base-files/etc/board.d/01_leds @@ -6,6 +6,9 @@ board_config_update board=$(board_name) case "$board" in +edgecore,eap102) + ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan" + ;; redmi,ax6|\ xiaomi,ax3600) ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan" |