diff options
| author | Mark Mentovai <mark@moxienet.com> | 2021-04-12 11:59:20 -0400 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2021-05-07 07:05:16 +0200 |
| commit | 565814a5eeb9252d0586c9c7a576f7d1cc9d4bc3 (patch) | |
| tree | 327f6621f54eac24e5658616ac0e95ac1485215f /target/linux/ipq806x | |
| parent | 4f74966852433651164c9a2a3544f727a45f30b4 (diff) | |
| download | upstream-565814a5eeb9252d0586c9c7a576f7d1cc9d4bc3.tar.gz upstream-565814a5eeb9252d0586c9c7a576f7d1cc9d4bc3.tar.bz2 upstream-565814a5eeb9252d0586c9c7a576f7d1cc9d4bc3.zip | |
ipq806x: ubnt,unifi-ac-hd: reorder eth0 and eth1
The Ubiquiti UniFi AC HD (UAP-AC-HD, UAP301) has two Ethernet ports,
labeled MAIN and SECONDARY, connected to gmac2 and gmac1, respectively.
The standard probe order results in gmac1/SECONDARY being eth0 and
gmac2/MAIN being eth1. This does not match the stock firmware, is
contrary to user expectation, causes the wrong (high) MAC address to be
used in a bridged configuration (the default for this device), and makes
the gmac2/MAIN port unusable in the preinit environment (such as for
failsafe). Until a recent patch, gmac1/SECONDARY (eth0) was not even
usable.
This reorders the ports so that gmac2/MAIN is eth0, and the now-working
gmac1/SECONDARY is eth1. eth0 has the low MAC address and eth1 has the
high; when bridged, the bridge takes on the correct low MAC address.
This matches the stock firmware. The MAIN port is usable for failsafe
during preinit.
This device does not have a switch on board, so there's no possibility
to remap ports via switch configuration. "ip link set $interface name"
is used instead, during preinit before networking is configured.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
Build-tested: ipq806x/ubnt,unifi-ac-hd
Run-tested: ipq806x/ubnt,unifi-ac-hd
Diffstat (limited to 'target/linux/ipq806x')
| -rw-r--r-- | target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth | 13 | ||||
| -rw-r--r-- | target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts | 4 |
2 files changed, 15 insertions, 2 deletions
diff --git a/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth b/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth new file mode 100644 index 0000000000..9f58473617 --- /dev/null +++ b/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth @@ -0,0 +1,13 @@ +. /lib/functions.sh + +preinit_reorder_eth() { + case $(board_name) in + ubnt,unifi-ac-hd) + ip link set eth0 name ethtmp + ip link set eth1 name eth0 + ip link set ethtmp name eth1 + ;; + esac +} + +boot_hook_add preinit_main preinit_reorder_eth diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts index 70c51b90f3..672be3ca2c 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts @@ -16,8 +16,8 @@ led-running = &led_dome_blue; led-upgrade = &led_dome_blue; mdio-gpio0 = &mdio0; - ethernet0 = &gmac1; - ethernet1 = &gmac2; + ethernet0 = &gmac2; + ethernet1 = &gmac1; }; leds { |