ipq806x: add kernel 4.14 support

 - Rebased the patches for 4.14
 - Dropped spi-qup and 0027, 0028, 0029
   clk patches since it's already included
   in upstream.

 Tested on IPQ AP148 Board:
  1) NOR boot and NAND boot
  2) Tested USB and PCIe interfaces
  3) WDOG test
  4) cpu frequency scaling
  5) ethernet, 2G and 5G WiFi
  6) ubi sysupgrade

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

1 files changed, 71 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch b/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch
new file mode 100644
index 0000000000..fd208e4ffa
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch
@@ -0,0 +1,71 @@
+From a86bda9f8a7965f0cedd347a9c04800eb9f41ea3 Mon Sep 17 00:00:00 2001
+From: Vasudevan Murugesan <vmuruges@codeaurora.org>
+Date: Tue, 21 Jul 2015 10:22:38 +0530
+Subject: ipq806x: usb: Control USB master reset
+
+During removal of the glue layer(dwc3-of-simple),
+USB master reset is set to active and during insertion
+it is de-activated.
+
+Change-Id: I537dc810f6cb2a46664ee674840145066432b957
+Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
+(cherry picked from commit 4611e13580a216812f85f0801b95442d02eeb836)
+---
+ drivers/usb/dwc3/dwc3-of-simple.c | 22 ++++++++++++++++++++++
+ 1 file changed, 12 insertions(+)
+
+(limited to 'drivers/usb/dwc3/dwc3-of-simple.c')
+
+--- a/drivers/usb/dwc3/dwc3-of-simple.c
++++ b/drivers/usb/dwc3/dwc3-of-simple.c
+@@ -25,6 +25,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/clk.h>
++#include <linux/reset.h>
+ #include <linux/of.h>
+ #include <linux/of_platform.h>
+ #include <linux/pm_runtime.h>
+@@ -33,6 +34,8 @@
+	struct device		*dev;
+	struct clk		**clks;
+	int			num_clocks;
++	struct reset_control	*mstr_rst_30_0;
++	struct reset_control	*mstr_rst_30_1;
+ };
+
+ static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
+@@ -102,6 +105,20 @@
+	if (ret)
+		return ret;
+
++	simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst");
++
++	if (!IS_ERR(simple->mstr_rst_30_0))
++		reset_control_deassert(simple->mstr_rst_30_0);
++	else
++		dev_dbg(simple->dev, "cannot get handle for USB PHY 0 master reset control\n");
++
++	simple->mstr_rst_30_1 = devm_reset_control_get(dev, "usb30_1_mstr_rst");
++
++	if (!IS_ERR(simple->mstr_rst_30_1))
++		reset_control_deassert(simple->mstr_rst_30_1);
++	else
++		dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n");
++
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret) {
+		for (i = 0; i < simple->num_clocks; i++) {
+@@ -130,6 +147,12 @@
+		clk_put(simple->clks[i]);
+	}
+
++	if (!IS_ERR(simple->mstr_rst_30_0))
++		reset_control_assert(simple->mstr_rst_30_0);
++
++	if (!IS_ERR(simple->mstr_rst_30_1))
++		reset_control_assert(simple->mstr_rst_30_1);
++
+	of_platform_depopulate(dev);
+
+	pm_runtime_put_sync(dev);