ipq806x: Add support for linux-4.4

1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>

1 files changed, 0 insertions, 247 deletions

diff --git a/target/linux/ipq806x/patches-3.18/122-mfd-devicetree-bindings-Add-Qualcomm-RPM-DT-binding.patch b/target/linux/ipq806x/patches-3.18/122-mfd-devicetree-bindings-Add-Qualcomm-RPM-DT-binding.patch
deleted file mode 100644
index a65d2c5131..0000000000
--- a/target/linux/ipq806x/patches-3.18/122-mfd-devicetree-bindings-Add-Qualcomm-RPM-DT-binding.patch
+++ /dev/null
@@ -1,247 +0,0 @@
-From aa0c4b815045420ea54d5ae5362f5a0190609d46 Mon Sep 17 00:00:00 2001
-From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
-Date: Wed, 26 Nov 2014 13:50:59 -0800
-Subject: [PATCH] mfd: devicetree: bindings: Add Qualcomm RPM DT binding
-
-Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
-8960 and 8064 based devices.
-
-Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
-Signed-off-by: Lee Jones <lee.jones@linaro.org>
----
- Documentation/devicetree/bindings/mfd/qcom-rpm.txt |  70 ++++++++++
- include/dt-bindings/mfd/qcom-rpm.h                 | 154 +++++++++++++++++++++
- 2 files changed, 224 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
- create mode 100644 include/dt-bindings/mfd/qcom-rpm.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
-@@ -0,0 +1,70 @@
-+Qualcomm Resource Power Manager (RPM)
-+
-+This driver is used to interface with the Resource Power Manager (RPM) found in
-+various Qualcomm platforms. The RPM allows each component in the system to vote
-+for state of the system resources, such as clocks, regulators and bus
-+frequencies.
-+
-+- compatible:
-+	Usage: required
-+	Value type: <string>
-+	Definition: must be one of:
-+		    "qcom,rpm-apq8064"
-+		    "qcom,rpm-msm8660"
-+		    "qcom,rpm-msm8960"
-+
-+- reg:
-+	Usage: required
-+	Value type: <prop-encoded-array>
-+	Definition: base address and size of the RPM's message ram
-+
-+- interrupts:
-+	Usage: required
-+	Value type: <prop-encoded-array>
-+	Definition: three entries specifying the RPM's:
-+		    1. acknowledgement interrupt
-+		    2. error interrupt
-+		    3. wakeup interrupt
-+
-+- interrupt-names:
-+	Usage: required
-+	Value type: <string-array>
-+	Definition: must be the three strings "ack", "err" and "wakeup", in order
-+
-+- #address-cells:
-+	Usage: required
-+	Value type: <u32>
-+	Definition: must be 1
-+
-+- #size-cells:
-+	Usage: required
-+	Value type: <u32>
-+	Definition: must be 0
-+
-+- qcom,ipc:
-+	Usage: required
-+	Value type: <prop-encoded-array>
-+
-+	Definition: three entries specifying the outgoing ipc bit used for
-+		    signaling the RPM:
-+		    - phandle to a syscon node representing the apcs registers
-+		    - u32 representing offset to the register within the syscon
-+		    - u32 representing the ipc bit within the register
-+
-+
-+= EXAMPLE
-+
-+	#include <dt-bindings/mfd/qcom-rpm.h>
-+
-+	rpm@108000 {
-+		compatible = "qcom,rpm-msm8960";
-+		reg = <0x108000 0x1000>;
-+		qcom,ipc = <&apcs 0x8 2>;
-+
-+		interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
-+		interrupt-names = "ack", "err", "wakeup";
-+
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+	};
-+
---- /dev/null
-+++ b/include/dt-bindings/mfd/qcom-rpm.h
-@@ -0,0 +1,154 @@
-+/*
-+ * This header provides constants for the Qualcomm RPM bindings.
-+ */
-+
-+#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
-+#define _DT_BINDINGS_MFD_QCOM_RPM_H
-+
-+/*
-+ * Constants use to identify individual resources in the RPM.
-+ */
-+#define QCOM_RPM_APPS_FABRIC_ARB		1
-+#define QCOM_RPM_APPS_FABRIC_CLK		2
-+#define QCOM_RPM_APPS_FABRIC_HALT		3
-+#define QCOM_RPM_APPS_FABRIC_IOCTL		4
-+#define QCOM_RPM_APPS_FABRIC_MODE		5
-+#define QCOM_RPM_APPS_L2_CACHE_CTL		6
-+#define QCOM_RPM_CFPB_CLK			7
-+#define QCOM_RPM_CXO_BUFFERS			8
-+#define QCOM_RPM_CXO_CLK			9
-+#define QCOM_RPM_DAYTONA_FABRIC_CLK		10
-+#define QCOM_RPM_DDR_DMM			11
-+#define QCOM_RPM_EBI1_CLK			12
-+#define QCOM_RPM_HDMI_SWITCH			13
-+#define QCOM_RPM_MMFPB_CLK			14
-+#define QCOM_RPM_MM_FABRIC_ARB			15
-+#define QCOM_RPM_MM_FABRIC_CLK			16
-+#define QCOM_RPM_MM_FABRIC_HALT			17
-+#define QCOM_RPM_MM_FABRIC_IOCTL		18
-+#define QCOM_RPM_MM_FABRIC_MODE			19
-+#define QCOM_RPM_PLL_4				20
-+#define QCOM_RPM_PM8058_LDO0			21
-+#define QCOM_RPM_PM8058_LDO1			22
-+#define QCOM_RPM_PM8058_LDO2			23
-+#define QCOM_RPM_PM8058_LDO3			24
-+#define QCOM_RPM_PM8058_LDO4			25
-+#define QCOM_RPM_PM8058_LDO5			26
-+#define QCOM_RPM_PM8058_LDO6			27
-+#define QCOM_RPM_PM8058_LDO7			28
-+#define QCOM_RPM_PM8058_LDO8			29
-+#define QCOM_RPM_PM8058_LDO9			30
-+#define QCOM_RPM_PM8058_LDO10			31
-+#define QCOM_RPM_PM8058_LDO11			32
-+#define QCOM_RPM_PM8058_LDO12			33
-+#define QCOM_RPM_PM8058_LDO13			34
-+#define QCOM_RPM_PM8058_LDO14			35
-+#define QCOM_RPM_PM8058_LDO15			36
-+#define QCOM_RPM_PM8058_LDO16			37
-+#define QCOM_RPM_PM8058_LDO17			38
-+#define QCOM_RPM_PM8058_LDO18			39
-+#define QCOM_RPM_PM8058_LDO19			40
-+#define QCOM_RPM_PM8058_LDO20			41
-+#define QCOM_RPM_PM8058_LDO21			42
-+#define QCOM_RPM_PM8058_LDO22			43
-+#define QCOM_RPM_PM8058_LDO23			44
-+#define QCOM_RPM_PM8058_LDO24			45
-+#define QCOM_RPM_PM8058_LDO25			46
-+#define QCOM_RPM_PM8058_LVS0			47
-+#define QCOM_RPM_PM8058_LVS1			48
-+#define QCOM_RPM_PM8058_NCP			49
-+#define QCOM_RPM_PM8058_SMPS0			50
-+#define QCOM_RPM_PM8058_SMPS1			51
-+#define QCOM_RPM_PM8058_SMPS2			52
-+#define QCOM_RPM_PM8058_SMPS3			53
-+#define QCOM_RPM_PM8058_SMPS4			54
-+#define QCOM_RPM_PM8821_LDO1			55
-+#define QCOM_RPM_PM8821_SMPS1			56
-+#define QCOM_RPM_PM8821_SMPS2			57
-+#define QCOM_RPM_PM8901_LDO0			58
-+#define QCOM_RPM_PM8901_LDO1			59
-+#define QCOM_RPM_PM8901_LDO2			60
-+#define QCOM_RPM_PM8901_LDO3			61
-+#define QCOM_RPM_PM8901_LDO4			62
-+#define QCOM_RPM_PM8901_LDO5			63
-+#define QCOM_RPM_PM8901_LDO6			64
-+#define QCOM_RPM_PM8901_LVS0			65
-+#define QCOM_RPM_PM8901_LVS1			66
-+#define QCOM_RPM_PM8901_LVS2			67
-+#define QCOM_RPM_PM8901_LVS3			68
-+#define QCOM_RPM_PM8901_MVS			69
-+#define QCOM_RPM_PM8901_SMPS0			70
-+#define QCOM_RPM_PM8901_SMPS1			71
-+#define QCOM_RPM_PM8901_SMPS2			72
-+#define QCOM_RPM_PM8901_SMPS3			73
-+#define QCOM_RPM_PM8901_SMPS4			74
-+#define QCOM_RPM_PM8921_CLK1			75
-+#define QCOM_RPM_PM8921_CLK2			76
-+#define QCOM_RPM_PM8921_LDO1			77
-+#define QCOM_RPM_PM8921_LDO2			78
-+#define QCOM_RPM_PM8921_LDO3			79
-+#define QCOM_RPM_PM8921_LDO4			80
-+#define QCOM_RPM_PM8921_LDO5			81
-+#define QCOM_RPM_PM8921_LDO6			82
-+#define QCOM_RPM_PM8921_LDO7			83
-+#define QCOM_RPM_PM8921_LDO8			84
-+#define QCOM_RPM_PM8921_LDO9			85
-+#define QCOM_RPM_PM8921_LDO10			86
-+#define QCOM_RPM_PM8921_LDO11			87
-+#define QCOM_RPM_PM8921_LDO12			88
-+#define QCOM_RPM_PM8921_LDO13			89
-+#define QCOM_RPM_PM8921_LDO14			90
-+#define QCOM_RPM_PM8921_LDO15			91
-+#define QCOM_RPM_PM8921_LDO16			92
-+#define QCOM_RPM_PM8921_LDO17			93
-+#define QCOM_RPM_PM8921_LDO18			94
-+#define QCOM_RPM_PM8921_LDO19			95
-+#define QCOM_RPM_PM8921_LDO20			96
-+#define QCOM_RPM_PM8921_LDO21			97
-+#define QCOM_RPM_PM8921_LDO22			98
-+#define QCOM_RPM_PM8921_LDO23			99
-+#define QCOM_RPM_PM8921_LDO24			100
-+#define QCOM_RPM_PM8921_LDO25			101
-+#define QCOM_RPM_PM8921_LDO26			102
-+#define QCOM_RPM_PM8921_LDO27			103
-+#define QCOM_RPM_PM8921_LDO28			104
-+#define QCOM_RPM_PM8921_LDO29			105
-+#define QCOM_RPM_PM8921_LVS1			106
-+#define QCOM_RPM_PM8921_LVS2			107
-+#define QCOM_RPM_PM8921_LVS3			108
-+#define QCOM_RPM_PM8921_LVS4			109
-+#define QCOM_RPM_PM8921_LVS5			110
-+#define QCOM_RPM_PM8921_LVS6			111
-+#define QCOM_RPM_PM8921_LVS7			112
-+#define QCOM_RPM_PM8921_MVS			113
-+#define QCOM_RPM_PM8921_NCP			114
-+#define QCOM_RPM_PM8921_SMPS1			115
-+#define QCOM_RPM_PM8921_SMPS2			116
-+#define QCOM_RPM_PM8921_SMPS3			117
-+#define QCOM_RPM_PM8921_SMPS4			118
-+#define QCOM_RPM_PM8921_SMPS5			119
-+#define QCOM_RPM_PM8921_SMPS6			120
-+#define QCOM_RPM_PM8921_SMPS7			121
-+#define QCOM_RPM_PM8921_SMPS8			122
-+#define QCOM_RPM_PXO_CLK			123
-+#define QCOM_RPM_QDSS_CLK			124
-+#define QCOM_RPM_SFPB_CLK			125
-+#define QCOM_RPM_SMI_CLK			126
-+#define QCOM_RPM_SYS_FABRIC_ARB			127
-+#define QCOM_RPM_SYS_FABRIC_CLK			128
-+#define QCOM_RPM_SYS_FABRIC_HALT		129
-+#define QCOM_RPM_SYS_FABRIC_IOCTL		130
-+#define QCOM_RPM_SYS_FABRIC_MODE		131
-+#define QCOM_RPM_USB_OTG_SWITCH			132
-+#define QCOM_RPM_VDDMIN_GPIO			133
-+
-+/*
-+ * Constants used to select force mode for regulators.
-+ */
-+#define QCOM_RPM_FORCE_MODE_NONE		0
-+#define QCOM_RPM_FORCE_MODE_LPM			1
-+#define QCOM_RPM_FORCE_MODE_HPM			2
-+#define QCOM_RPM_FORCE_MODE_AUTO		3
-+#define QCOM_RPM_FORCE_MODE_BYPASS		4
-+
-+#endif