ipq806x: fix leds, sata port for Netgear R7800 and minor fixes - renamed leds in correct color accordance - blink power led with white during boot and with amber when flashing firmware - fixed usb leds - enabled unused wps and rfkill leds as wlan leds. Now rfkill led is for 2.4GHz and wps - 5GHz WIFI - removed unneeded bootargs - removed unneeded pci pins from R7800 DT (driver already handles it in proper way) and add tx offsetting - nand ecc step size - fixed sata ports

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

1 files changed, 34 insertions, 32 deletions

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index 6d9349f853..43ee572ac6 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -4,7 +4,7 @@
 
 / {
 	model = "Netgear Nighthawk X4S R7800";
-	compatible = "netgear,r7800", "qcom,ipq8065";
+	compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
 
 	memory@0 {
 		reg = <0x42000000 0x1e000000>;
@@ -29,10 +29,14 @@
 	aliases {
 		serial0 = &uart4;
 		mdio-gpio0 = &mdio0;
+
+		led-boot = &power_white;
+		led-failsafe = &power_white;
+		led-running = &power_white;
+		led-upgrade = &power_amber;
 	};
 
 	chosen {
-		bootargs = "rootfstype=squashfs noinitrd";
 		linux,stdout-path = "serial0:115200n8";
 	};
 
@@ -160,6 +164,7 @@
 		};
 
 		sata@29000000 {
+			ports-implemented = <0x1>;
 			status = "ok";
 		};
 
@@ -189,16 +194,12 @@
 
 		pcie0: pci@1b500000 {
 			status = "ok";
-			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-			pinctrl-0 = <&pcie0_pins>;
-			pinctrl-names = "default";
+			phy-tx0-term-offset = <7>;
 		};
 
 		pcie1: pci@1b700000 {
 			status = "ok";
-			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-			pinctrl-0 = <&pcie1_pins>;
-			pinctrl-names = "default";
+			phy-tx0-term-offset = <7>;
 		};
 
 		nand@1ac00000 {
@@ -208,6 +209,7 @@
 			pinctrl-names = "default";
 
 			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
 			nand-bus-width = <8>;
 
 			#address-cells = <1>;
@@ -368,7 +370,7 @@
 		wifi {
 			label = "wifi";
 			gpios = <&qcom_pinmux 6 1>;
-			linux,code = <KEY_WLAN>;
+			linux,code = <KEY_RFKILL>;
 		};
 
 		reset {
@@ -387,34 +389,35 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		usb1 {
-			label = "r7800:amber:usb1";
-			gpios = <&qcom_pinmux 7 0>;
-		};
-
-		usb3 {
-			label = "r7800:amber:usb3";
-			gpios = <&qcom_pinmux 8 0>;
+		power_white: power_white {
+			label = "r7800:white:power";
+			gpios = <&qcom_pinmux 53 0>;
+			default-state = "on";
 		};
 
-		status {
-			label = "r7800:amber:status";
+		power_amber: power_amber {
+			label = "r7800:amber:power";
 			gpios = <&qcom_pinmux 9 0>;
 		};
 
-		internet {
-			label = "r7800:white:internet";
+		wan_white {
+			label = "r7800:white:wan";
 			gpios = <&qcom_pinmux 22 0>;
 		};
 
-		wan {
-			label = "r7800:white:wan";
+		wan_amber {
+			label = "r7800:amber:wan";
 			gpios = <&qcom_pinmux 23 0>;
 		};
 
-		wps {
-			label = "r7800:white:wps";
-			gpios = <&qcom_pinmux 24 0>;
+		usb1 {
+			label = "r7800:white:usb1";
+			gpios = <&qcom_pinmux 7 0>;
+		};
+
+		usb2 {
+			label = "r7800:white:usb2";
+			gpios = <&qcom_pinmux 8 0>;
 		};
 
 		esata {
@@ -422,17 +425,16 @@
 			gpios = <&qcom_pinmux 26 0>;
 		};
 
-		power {
-			label = "r7800:white:power";
-			gpios = <&qcom_pinmux 53 0>;
-			default-state = "on";
-		};
-
 		rfkill {
 			label = "r7800:white:rfkill";
 			gpios = <&qcom_pinmux 64 0>;
 		};
 
+		wps {
+			label = "r7800:white:wps";
+			gpios = <&qcom_pinmux 24 0>;
+		};
+
 		wifi {
 			label = "r7800:white:wifi";
 			gpios = <&qcom_pinmux 67 0>;