ipq806x: use qcom-ipq8064-v1.0.dtsi from upstream

This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
instead of keeping a local version. As a consequence:

- we use a part of the shared definitions there and update device
  DTS files accordingly
- we move additional stuff from our local v1.0.dtsi to the patch
- we drop partitions, LEDs and keys from the file as we will
  implement them differently anyway

Like with the previous patch, this follows the idea that a diff
from upstream might be easier to handle than a big file of our
own with different distribution pattern of properties.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 10 insertions, 48 deletions

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 6c3410bf35..a23f3da469 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -28,46 +28,16 @@
 	status = "okay";
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-
-	serial@16340000 {
-		status = "okay";
-	};
-
-	/*
-	* The i2c device on gsbi4 should not be enabled.
-	* On ipq806x designs gsbi4 i2c is meant for exclusive
-	* RPM usage. Turning this on in kernel manifests as
-	* i2c failure for the RPM.
-	*/
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi4: spi@1a280000 {
-		status = "okay";
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		m25p80@0 {
-			compatible = "s25fl256s1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "qcom,smem";
-			};
-		};
+/*
+* The i2c device on gsbi4 should not be enabled.
+* On ipq806x designs gsbi4 i2c is meant for exclusive
+* RPM usage. Turning this on in kernel manifests as
+* i2c failure for the RPM.
+*/
+
+&flash {
+	partitions {
+		compatible = "qcom,smem";
 	};
 };
 
@@ -156,11 +126,3 @@
 		full-duplex;
 	};
 };
-
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};