ipq40xx: 5.10: copy patches

Copy over the 5.4 kernel patches to 5.10 folder.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>

1 files changed, 97 insertions, 0 deletions

diff --git a/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch
new file mode 100644
index 0000000000..b033a1baee
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch
@@ -0,0 +1,97 @@
+From 193856b5fe11c50a0b6ff22457dd674c1a45fec6 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Wed, 9 Sep 2020 18:31:03 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes
+
+Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Reviewed-by: Vinod Koul <vkoul@kernel.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++
+ 1 file changed, 74 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -615,5 +615,79 @@
+ 				reg = <4>;
+ 			};
+ 		};
++
++		usb3_ss_phy: ssphy@9a000 {
++			compatible = "qcom,usb-ss-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0x9a000 0x800>;
++			reg-names = "phy_base";
++			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
++			reset-names = "por_rst";
++			status = "disabled";
++		};
++
++		usb3_hs_phy: hsphy@a6000 {
++			compatible = "qcom,usb-hs-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0xa6000 0x40>;
++			reg-names = "phy_base";
++			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
++			reset-names = "por_rst", "srif_rst";
++			status = "disabled";
++		};
++
++		usb3: usb3@8af8800 {
++			compatible = "qcom,dwc3";
++			reg = <0x8af8800 0x100>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc GCC_USB3_MASTER_CLK>,
++				 <&gcc GCC_USB3_SLEEP_CLK>,
++				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
++			clock-names = "master", "sleep", "mock_utmi";
++			ranges;
++			status = "disabled";
++
++			dwc3@8a00000 {
++				compatible = "snps,dwc3";
++				reg = <0x8a00000 0xf8000>;
++				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
++				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
++				phy-names = "usb2-phy", "usb3-phy";
++				dr_mode = "host";
++			};
++		};
++
++		usb2_hs_phy: hsphy@a8000 {
++			compatible = "qcom,usb-hs-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0xa8000 0x40>;
++			reg-names = "phy_base";
++			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
++			reset-names = "por_rst", "srif_rst";
++			status = "disabled";
++		};
++
++		usb2: usb2@60f8800 {
++			compatible = "qcom,dwc3";
++			reg = <0x60f8800 0x100>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc GCC_USB2_MASTER_CLK>,
++				 <&gcc GCC_USB2_SLEEP_CLK>,
++				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
++			clock-names = "master", "sleep", "mock_utmi";
++			ranges;
++			status = "disabled";
++
++			dwc3@6000000 {
++				compatible = "snps,dwc3";
++				reg = <0x6000000 0xf8000>;
++				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
++				phys = <&usb2_hs_phy>;
++				phy-names = "usb2-phy";
++				dr_mode = "host";
++			};
++		};
+ 	};
+ };