ipq40xx: consolidate DTS files

The DTS files in files-4.19 and files-5.4 are exactly identical
except for one file (qcom-ipq4018-emr3500.dts), which is only
present for 5.4.

Since there is no point in maintaining all these identical files
twice, this patch moves them to the "files" directory.

If there ever was a new kernel with substantial DTS changes, a
new folder would need to be introduced anyway and could easily be
done.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 219 deletions

diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts
deleted file mode 100644
index 33c44a8097..0000000000
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "OpenMesh A42";
-	compatible = "openmesh,a42";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			label = "a42:red:status";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-
-		power: green {
-			label = "a42:green:status";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue {
-			label = "a42:blue:status";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		/* hw_margin_ms is actually 300s but driver limits it to 60s */
-		hw_margin_ms = <60000>;
-		always-running;
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		/* partitions are passed via bootloader */
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A42";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A42";
-};