ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data

moves extraction entries out of 11-ath10k-caldata and into
the individual board's device-tree.

Some notes:
 - mmc could work as well (not tested)
 - devices that pass the partitions via mtdparts
   bootargs are kept as is
 - gl-b2200 has a weird pcie wifi device
   (vendor claims 9886 wave 2. But firmware-extraction
   was for a wave 1 device?!)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

1 files changed, 5 insertions, 95 deletions

diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 12061eadf5..c8b1e12ea3 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -9,9 +9,6 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
 	case "$board" in
-	glinet,gl-b2200)
-		caldata_extract "ART" 0x9000 0x2f20
-		;;
 	meraki,mr33)
 		caldata_extract_ubi "ART" 0x9000 0x844
 		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
@@ -37,11 +34,6 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x9000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
-		;;
-	engenius,eap2200 |\
 	openmesh,a62 |\
 	plasmacloud,pa2200)
 		caldata_extract "0:ART" 0x9000 0x2f20
@@ -63,29 +55,11 @@ case "$FIRMWARE" in
 	;;
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
 	case "$board" in
-	8dev,habanero-dvk |\
-	8dev,jalapeno |\
-	alfa-network,ap120c-ac |\
-	cilab,meshpoint-one |\
-	glinet,gl-ap1300 |\
-	glinet,gl-b1300 |\
-	glinet,gl-b2200 |\
-	glinet,gl-s1300 |\
-	linksys,ea6350v3 |\
-	mobipromo,cm520-79f |\
-	p2w,r619ac-64m |\
-	p2w,r619ac-128m |\
 	qcom,ap-dk01.1-c1)
 		caldata_extract "ART" 0x1000 0x2f20
 		;;
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
-		;;
-	asus,map-ac2200 |\
-	asus,rt-ac42u |\
+	asus,map-ac2200|\
+	asus,rt-ac42u|\
 	asus,rt-ac58u)
 		caldata_extract_ubi "Factory" 0x1000 0x2f20
 		;;
@@ -102,25 +76,10 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
-		;;
-	cellc,rtl30vw |\
-	compex,wpj419 |\
-	compex,wpj428 |\
-	edgecore,ecw5211 |\
-	edgecore,oap100 |\
-	engenius,eap1300 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn|\
 	openmesh,a42 |\
 	openmesh,a62 |\
 	plasmacloud,pa1200 |\
-	plasmacloud,pa2200 |\
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |\
-	unielec,u4019-32m)
+	plasmacloud,pa2200)
 		caldata_extract "0:ART" 0x1000 0x2f20
 		;;
 	devolo,magic-2-wifi-next)
@@ -166,14 +125,6 @@ case "$FIRMWARE" in
 		caldata_extract_mmc "0:ART" 0x1000 0x2f20
 		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 		;;
-	netgear,wac510)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
-		;;
-	teltonika,rutx10)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
-		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
 		caldata_extract "ART" 0x1000 0x2f20
@@ -183,28 +134,10 @@ case "$FIRMWARE" in
 	;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 	case "$board" in
-	8dev,habanero-dvk |\
-	8dev,jalapeno |\
-	alfa-network,ap120c-ac |\
-	cilab,meshpoint-one |\
-	glinet,gl-ap1300 |\
-	glinet,gl-b1300 |\
-	glinet,gl-b2200 |\
-	glinet,gl-s1300 |\
-	linksys,ea6350v3 |\
-	mobipromo,cm520-79f |\
-	p2w,r619ac-64m |\
-	p2w,r619ac-128m |\
 	qcom,ap-dk01.1-c1)
 		caldata_extract "ART" 0x5000 0x2f20
 		;;
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1)
-		;;
-	asus,map-ac2200 |\
+	asus,map-ac2200|\
 	asus,rt-ac58u)
 		caldata_extract_ubi "Factory" 0x5000 0x2f20
 		;;
@@ -221,25 +154,10 @@ case "$FIRMWARE" in
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
-		;;
-	cellc,rtl30vw |\
-	compex,wpj419 |\
-	compex,wpj428 |\
-	edgecore,ecw5211 |\
-	edgecore,oap100 |\
-	engenius,eap1300 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn|\
 	openmesh,a42 |\
 	openmesh,a62 |\
 	plasmacloud,pa1200 |\
-	plasmacloud,pa2200 |\
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |\
-	unielec,u4019-32m)
+	plasmacloud,pa2200)
 		caldata_extract "0:ART" 0x5000 0x2f20
 		;;
 	devolo,magic-2-wifi-next)
@@ -286,14 +204,6 @@ case "$FIRMWARE" in
 		caldata_extract_mmc "0:ART" 0x5000 0x2f20
 		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 		;;
-	netgear,wac510)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16)
-		;;
-	teltonika,rutx10)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
-		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
 		caldata_extract "ART" 0x5000 0x2f20