diff options
| author | Tony Ambardar <itugrok@yahoo.com> | 2022-11-30 20:10:59 -0800 |
|---|---|---|
| committer | Tony Ambardar <itugrok@yahoo.com> | 2022-12-31 05:02:38 -0800 |
| commit | cda6f1c832f96bd24e5398e156a0e8d639c691a0 (patch) | |
| tree | 68f6837653aec842b08f45b2e3c5c2286046403b /target/linux/ipq40xx/base-files | |
| parent | af3c9b74e177019b18055c263099a42c1c6c3453 (diff) | |
| download | upstream-cda6f1c832f96bd24e5398e156a0e8d639c691a0.tar.gz upstream-cda6f1c832f96bd24e5398e156a0e8d639c691a0.tar.bz2 upstream-cda6f1c832f96bd24e5398e156a0e8d639c691a0.zip | |
ipq40xx: re-enable EA6350v3, EA8300, MR8300 builds
Raise the kernel size from 3 MB to 5 MB for EA6350v3, EA8300 and MR8300,
and correspondingly reduce the rootfs size by 2 MB:
* modify partition definitions in related .dts files
* modify device kernel/image sizes in generic.mk
Update to compat-version 2.0 to force factory image usage on sysupgrade,
noting the current version 1.1 is an unreleased update for DSA migration.
Also update the compat-version message, explaining the need to run one of
the following console commands to update U-Boot's kernel-size variable
before flashing the OpenWrt factory image.
fw_setenv kernsize 500000 # (OpenWrt command line)
setenv kernsize 500000 ; saveenv # (U-Boot serial console)
Finally, re-enable the 3 devices.
Reviewed-by: Robert Marko <robimarko@gmail.com>
Tested-by: Nicolas TORMO <badulesia.granieri@gmail.com> # MR8300
Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Diffstat (limited to 'target/linux/ipq40xx/base-files')
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version b/target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version index 44873b9df4..c011920897 100644 --- a/target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version +++ b/target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version @@ -1,6 +1,9 @@ . /lib/functions.sh case "$(board_name)" in +linksys,ea6350v3|\ +linksys,ea8300|\ +linksys,mr8300|\ ezviz,cs-w3-wd1200g-eup) uci set system.@system[0].compat_version="2.0" uci commit system |