aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx/base-files/etc/board.d
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2019-01-29 18:12:51 +0100
committerPiotr Dymacz <pepe2k@gmail.com>2019-02-26 00:16:22 +0100
commitc568c6dc09f0a847097fb9697369114a251f096d (patch)
treed2abd71d3a4d03c0ba3c008798404d0e23ab7df4 /target/linux/ipq40xx/base-files/etc/board.d
parentd3f82d3b8466a3328755a80ac249d447cb2309a2 (diff)
downloadupstream-c568c6dc09f0a847097fb9697369114a251f096d.tar.gz
upstream-c568c6dc09f0a847097fb9697369114a251f096d.tar.bz2
upstream-c568c6dc09f0a847097fb9697369114a251f096d.zip
ipq40xx: add support for ALFA Network AP120C-AC
ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm IPQ4018 + QCA8075 platform. Specification: - Qualcomm IPQ4018 (717 MHz) - 256 MB of RAM (DDR3) - 16 MB (SPI NOR) + 128 MB (SPI NAND) of flash - 2x Gbps Ethernet, with 802.3af PoE support in one port - 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922) - 3x U.FL connectors - 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas - Atmel/Microchip AT97SC3205T TPM module (I2C bus) - TI CC2540 Bluetooth LE module (USB 2.0 bus) - 4x LED (all driven by GPIO) - 1x button (reset) - 1x USB 2.0 (optional, not installed in indoor version) - DC jack for main power input (12 V) - UART header available on PCB (2.0 mm pitch) Flash instruction: 1. This board uses dual-image feature (128 MB NAND is divided into two 64 MB partitions: 'rootfs1' and 'rootfs2'). 2. Before update, make sure your device is running firmware no older than v1.1 (previous versions have incompatible U-Boot). 3. Use 'factory' image in vendor GUI or for sysupgrade tool, without preserving settings. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ipq40xx/base-files/etc/board.d')
-rwxr-xr-xtarget/linux/ipq40xx/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ipq40xx/base-files/etc/board.d/02_network3
2 files changed, 5 insertions, 1 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
index 9105bf2452..2fca1cbc9f 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -11,6 +11,9 @@ board=$(board_name)
boardname="${board##*,}"
case "$board" in
+alfa-network,ap120c-ac)
+ ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1"
+ ;;
asus,rt-ac58u)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2G" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5G" "phy1tpt"
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 43be592071..b28f5ef12c 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -12,7 +12,8 @@ ipq40xx_setup_interfaces()
local board="$1"
case "$board" in
- 8dev,jalapeno)
+ 8dev,jalapeno|\
+ alfa-network,ap120c-ac)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
asus,map-ac2200|\