aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch
diff options
context:
space:
mode:
authorTim Harvey <tharvey@gateworks.com>2020-03-11 08:02:58 -0700
committerPetr Štetiar <ynezz@true.cz>2020-03-12 12:59:44 +0100
commit3666c67a5430abea1b70864e9cf218c1f192f5de (patch)
tree48f2752e0d0d928fad119cceb5eccd42f5462ce1 /target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch
parent86b59d0709116209185f43b7c1144b198b38c1d2 (diff)
downloadupstream-3666c67a5430abea1b70864e9cf218c1f192f5de.tar.gz
upstream-3666c67a5430abea1b70864e9cf218c1f192f5de.tar.bz2
upstream-3666c67a5430abea1b70864e9cf218c1f192f5de.zip
imx6: add support for GW5907/GW5910/GW5912/GW5913
This patch adds support for GW5907/GW5910/GW5912/GW5913 IMX6 based boards from the Gateworks Ventana Family[A]: - backport upstream dt patches from 5.6 to 4.19 and 5.4 - add dtb's to ventana images - add board-name and network config A. https://www.gateworks.com/products/imx6-single-board-computer-gateworks-ventana-family Flashing instructions for Ventana boards: Using pre-flashed bootloader: - Use appropriate ubi image depending on board NAND to flash via bootloader: openwrt-imx6-ventana-squashfs-nand.ubi - 2KiB page size openwrt-imx6-ventana-large-squashfs-nand.ubi - 4KiB page size http://trac.gateworks.com/wiki/linux/ubi Using Gateworks JTAG dongle: - Use Gateworks mkimage_jtag script to create a JTAG image comprised of pre-built bootloader and ubi image: http://trac.gateworks.com/wiki/jtag_instructions Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Diffstat (limited to 'target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch')
-rw-r--r--target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch496
1 files changed, 496 insertions, 0 deletions
diff --git a/target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch b/target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch
new file mode 100644
index 0000000000..a4e9604ffa
--- /dev/null
+++ b/target/linux/imx6/patches-4.19/001-ARM-dts-imx-Add-GW5907-board-support.patch
@@ -0,0 +1,496 @@
+From 125120298dc05bb55a8874f07aa3f4bb6056bfb3 Mon Sep 17 00:00:00 2001
+From: Robert Jones <rjones@gateworks.com>
+Date: Wed, 8 Jan 2020 07:44:21 -0800
+Subject: [PATCH 1/4] ARM: dts: imx: Add GW5907 board support
+
+The Gateworks GW5907 is an IMX6 SoC based single board computer with:
+ - IMX6Q or IMX6DL
+ - 32bit DDR3 DRAM
+ - FEC GbE Phy
+ - bi-color front-panel LED
+ - 256MB NAND boot device
+ - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
+ - Digital IO expander (pca9555)
+ - Joystick 12bit adc (ads1015)
+
+Signed-off-by: Robert Jones <rjones@gateworks.com>
+Reviewed-by: Tim Harvey <tharvey@gateworks.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+---
+ arch/arm/boot/dts/Makefile | 2 +
+ arch/arm/boot/dts/imx6dl-gw5907.dts | 14 ++
+ arch/arm/boot/dts/imx6q-gw5907.dts | 14 ++
+ arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 399 ++++++++++++++++++++++++++++++++++
+ 4 files changed, 429 insertions(+)
+ create mode 100644 arch/arm/boot/dts/imx6dl-gw5907.dts
+ create mode 100644 arch/arm/boot/dts/imx6q-gw5907.dts
+ create mode 100644 arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 1e9e1af..9ee80e2 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -422,6 +422,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+ imx6dl-gw560x.dtb \
+ imx6dl-gw5903.dtb \
+ imx6dl-gw5904.dtb \
++ imx6dl-gw5907.dtb \
+ imx6dl-hummingboard.dtb \
+ imx6dl-hummingboard-emmc-som-v15.dtb \
+ imx6dl-hummingboard-som-v15.dtb \
+@@ -493,6 +494,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+ imx6q-gw560x.dtb \
+ imx6q-gw5903.dtb \
+ imx6q-gw5904.dtb \
++ imx6q-gw5907.dtb \
+ imx6q-h100.dtb \
+ imx6q-hummingboard.dtb \
+ imx6q-hummingboard-emmc-som-v15.dtb \
+diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/imx6dl-gw5907.dts
+new file mode 100644
+index 00000000..3fa2822
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-gw5907.dts
+@@ -0,0 +1,14 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright 2019 Gateworks Corporation
++ */
++
++/dts-v1/;
++
++#include "imx6dl.dtsi"
++#include "imx6qdl-gw5907.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
++ compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
++};
+diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/imx6q-gw5907.dts
+new file mode 100644
+index 00000000..b25526e
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-gw5907.dts
+@@ -0,0 +1,14 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright 2019 Gateworks Corporation
++ */
++
++/dts-v1/;
++
++#include "imx6q.dtsi"
++#include "imx6qdl-gw5907.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
++ compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
++};
+diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+new file mode 100644
+index 00000000..0bdebdd
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+@@ -0,0 +1,399 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright 2019 Gateworks Corporation
++ */
++
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ /* these are used by bootloader for disabling nodes */
++ aliases {
++ led0 = &led0;
++ led1 = &led1;
++ nand = &gpmi;
++ usb0 = &usbh1;
++ usb1 = &usbotg;
++ };
++
++ chosen {
++ stdout-path = &uart2;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpio_leds>;
++
++ led0: user1 {
++ label = "user1";
++ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++
++ led1: user2 {
++ label = "user2";
++ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
++ default-state = "off";
++ };
++ };
++
++ memory@10000000 {
++ device_type = "memory";
++ reg = <0x10000000 0x20000000>;
++ };
++
++ pps {
++ compatible = "pps-gpio";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pps>;
++ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ reg_5p0v: regulator-5p0v {
++ compatible = "regulator-fixed";
++ regulator-name = "5P0V";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ };
++
++ reg_usb_otg_vbus: regulator-usb-otg-vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++};
++
++&fec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet>;
++ phy-mode = "rgmii-id";
++ phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
++ status = "okay";
++};
++
++&gpmi {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpmi_nand>;
++ status = "okay";
++};
++
++&hdmi {
++ ddc-i2c-bus = <&i2c3>;
++ status = "okay";
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1>;
++ status = "okay";
++
++ gpio@23 {
++ compatible = "nxp,pca9555";
++ reg = <0x23>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ eeprom@50 {
++ compatible = "atmel,24c02";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++
++ eeprom@51 {
++ compatible = "atmel,24c02";
++ reg = <0x51>;
++ pagesize = <16>;
++ };
++
++ eeprom@52 {
++ compatible = "atmel,24c02";
++ reg = <0x52>;
++ pagesize = <16>;
++ };
++
++ eeprom@53 {
++ compatible = "atmel,24c02";
++ reg = <0x53>;
++ pagesize = <16>;
++ };
++
++ rtc@68 {
++ compatible = "dallas,ds1672";
++ reg = <0x68>;
++ };
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c2>;
++ status = "okay";
++};
++
++&i2c3 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c3>;
++ status = "okay";
++
++ gpio@20 {
++ compatible = "nxp,pca9555";
++ reg = <0x20>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ adc@48 {
++ compatible = "ti,ads1015";
++ reg = <0x48>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ channel@4 {
++ reg = <4>;
++ ti,gain = <0>;
++ ti,datarate = <5>;
++ };
++
++ channel@5 {
++ reg = <5>;
++ ti,gain = <0>;
++ ti,datarate = <5>;
++ };
++
++ channel@6 {
++ reg = <6>;
++ ti,gain = <0>;
++ ti,datarate = <5>;
++ };
++ };
++};
++
++&pcie {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pcie>;
++ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
++ status = "okay";
++};
++
++&pwm2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
++ status = "disabled";
++};
++
++&pwm3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
++ status = "disabled";
++};
++
++&pwm4 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
++ status = "disabled";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart2>;
++ status = "okay";
++};
++
++&uart3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart3>;
++ status = "okay";
++};
++
++&uart5 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart5>;
++ status = "okay";
++};
++
++&usbotg {
++ vbus-supply = <&reg_usb_otg_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg>;
++ disable-over-current;
++ status = "okay";
++};
++
++&usbh1 {
++ status = "okay";
++};
++
++&wdog1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_wdog>;
++ fsl,ext-reset-output;
++};
++
++&iomuxc {
++ pinctrl_enet: enetgrp {
++ fsl,pins = <
++ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
++ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
++ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
++ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
++ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
++ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
++ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
++ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
++ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
++ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
++ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
++ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
++ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
++ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
++ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
++ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
++ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
++ >;
++ };
++
++ pinctrl_gpio_leds: gpioledsgrp {
++ fsl,pins = <
++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
++ >;
++ };
++
++ pinctrl_gpmi_nand: gpminandgrp {
++ fsl,pins = <
++ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
++ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
++ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
++ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
++ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
++ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
++ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
++ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
++ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
++ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
++ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
++ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
++ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
++ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
++ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
++ >;
++ };
++
++ pinctrl_i2c1: i2c1grp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
++ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
++ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
++ >;
++ };
++
++ pinctrl_i2c2: i2c2grp {
++ fsl,pins = <
++ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
++ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
++ >;
++ };
++
++ pinctrl_i2c3: i2c3grp {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
++ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
++ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
++ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
++ >;
++ };
++
++ pinctrl_pcie: pciegrp {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
++ >;
++ };
++
++ pinctrl_pps: ppsgrp {
++ fsl,pins = <
++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
++ >;
++ };
++
++ pinctrl_pwm2: pwm2grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
++ >;
++ };
++
++ pinctrl_pwm3: pwm3grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
++ >;
++ };
++
++ pinctrl_pwm4: pwm4grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
++ >;
++ };
++
++ pinctrl_uart1: uart1grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
++ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
++ >;
++ };
++
++ pinctrl_uart2: uart2grp {
++ fsl,pins = <
++ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
++ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
++ >;
++ };
++
++ pinctrl_uart3: uart3grp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
++ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
++ >;
++ };
++
++ pinctrl_uart5: uart5grp {
++ fsl,pins = <
++ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
++ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
++ >;
++ };
++
++ pinctrl_usbotg: usbotggrp {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
++ >;
++ };
++
++ pinctrl_wdog: wdoggrp {
++ fsl,pins = <
++ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
++ >;
++ };
++};
+--
+2.7.4
+