imx6: rename target to 'imx'

This is first step in migrating to a generic i.MX target which in the
next steps will also get divided into arch-specific subtargets.

In the result, this will make it possible to support, within a single
target, also other modern NXP i.MX families, like the i.MX 7, i.MX 8
or recently introduced i.MX 9.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

1 files changed, 0 insertions, 85 deletions

diff --git a/target/linux/imx6/image/bootscript-ventana b/target/linux/imx6/image/bootscript-ventana
deleted file mode 100644
index 734f74a30c5..00000000000
--- a/target/linux/imx6/image/bootscript-ventana
+++ /dev/null
@@ -1,85 +0,0 @@
-echo "Gateworks Ventana OpenWrt Boot script v1.02"
-
-# set some defaults
-# set some defaults
-test -n "$fs"    || fs=ext2
-test -n "$disk"  || disk=0
-setenv nextcon 0
-setenv bootargs console=${console},${baudrate}
-setenv loadaddr 10800000
-setenv fdt_addr 18000000
-
-# detect dtype by looking for kernel on media the bootloader
-# has mounted (in order of preference: usb/mmc/sata)
-#
-# This assumes the bootloader has already started the respective subsystem
-# or mounted the filesystem if appropriate to get to this bootscript
-#
-# To Speed up boot set dtype manually
-if test -n "$dtype" ; then
-	echo "Using dtype from env: $dtype"
-else
-	echo "Detecting boot device (dtype)..."
-	if ${fs}load usb ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
-		dtype=usb
-	elif ${fs}load mmc ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
-		dtype=mmc
-	elif ${fs}load sata ${disk}:1 ${loadaddr} ${bootdir}/uImage ; then
-		dtype=sata
-	elif ubifsload ${loadaddr} ${bootdir}/uImage ; then
-		dtype=nand
-	fi
-	echo "detected dtype:$dtype"
-fi
-
-echo "Booting from ${dtype}..."
-if itest.s "x${dtype}" == "xnand" ; then
-	# fix partition name
-	#  OpenWrt kernel bug prevents partition name of 'rootfs' from booting
-	#  instead name the partition ubi which is what is looked for by
-	#  procd sysupgrade
-	mtdparts del rootfs && mtdparts add nand0 - ubi
-	echo "mtdparts:${mtdparts}"
-	setenv fsload ubifsload
-	setenv root "ubi0:ubi ubi.mtd=2 rootfstype=squashfs,ubifs"
-else
-	setenv fsload "${fs}load ${dtype} ${disk}:1"
-	part uuid ${dtype} ${disk}:1 uuid
-	if test -z "${uuid}"; then
-		# fallback to bootdev
-		if test -n "$bootdev" ; then
-			echo "Using bootdev from env: $bootdev"
-		else
-			if itest.s "x${dtype}" == "xmmc" ; then
-				bootdev=mmcblk0p1
-			else
-				bootdev=sda1
-			fi
-		fi
-		setenv root "root=/dev/${bootdev}"
-	else
-		setenv root "root=PARTUUID=${uuid}"
-	fi
-	setenv root "$root rootfstype=${fs} rootwait rw"
-fi
-
-setenv bootargs "${bootargs}" "${root}" "${video}" "${extra}"
-if ${fsload} ${loadaddr} ${bootdir}/uImage; then
-	if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then
-		echo Loaded DTB from ${bootdir}/${fdt_file}
-		test -n "$fixfdt" && run fixfdt
-		bootm ${loadaddr} - ${fdt_addr}
-	elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then
-		echo Loaded DTB from ${bootdir}/${fdt_file1}
-		test -n "$fixfdt" && run fixfdt
-		bootm ${loadaddr} - ${fdt_addr}
-	elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then
-		echo Loaded DTB from ${bootdir}/${fdt_file2}
-		test -n "$fixfdt" && run fixfdt
-		bootm ${loadaddr} - ${fdt_addr}
-	else
-		echo "Error loading device-tree"
-	fi
-else
-	echo "Error loading kernel image"
-fi