kernel: Remove support for kernel 3.18

No target is using kernel 3.18 anymore, remove all the generic
support for kernel 3.18.

The removed packages are depending on kernel 3.18 only and are not used on
any recent kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 180 deletions

diff --git a/target/linux/generic/pending-3.18/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-3.18/734-net-phy-at803x-allow-to-configure-via-pdata.patch
deleted file mode 100644
index 0d021ac7bd..0000000000
--- a/target/linux/generic/pending-3.18/734-net-phy-at803x-allow-to-configure-via-pdata.patch
+++ /dev/null
@@ -1,180 +0,0 @@
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -12,12 +12,14 @@
-  */
- 
- #include <linux/phy.h>
-+#include <linux/mdio.h>
- #include <linux/module.h>
- #include <linux/string.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
- #include <linux/of_gpio.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/platform_data/phy-at803x.h>
- 
- #define AT803X_INTR_ENABLE			0x12
- #define AT803X_INTR_STATUS			0x13
-@@ -34,8 +36,16 @@
- #define AT803X_INER				0x0012
- #define AT803X_INER_INIT			0xec00
- #define AT803X_INSR				0x0013
-+
-+#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
-+#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
-+
- #define AT803X_DEBUG_ADDR			0x1D
- #define AT803X_DEBUG_DATA			0x1E
-+#define AT803X_DBG0_REG				0x00
-+#define AT803X_DEBUG_RGMII_RX_CLK_DLY		BIT(8)
- #define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
- #define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
- 
-@@ -50,6 +60,7 @@ MODULE_LICENSE("GPL");
- struct at803x_priv {
- 	bool phy_reset:1;
- 	struct gpio_desc *gpiod_reset;
-+	int prev_speed;
- };
- 
- struct at803x_context {
-@@ -61,6 +72,43 @@ struct at803x_context {
- 	u16 led_control;
- };
- 
-+static u16
-+at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set)
-+{
-+	struct mii_bus *bus = phydev->bus;
-+	int val;
-+
-+	mutex_lock(&bus->mdio_lock);
-+
-+	bus->write(bus, phydev->addr, AT803X_DEBUG_ADDR, reg);
-+	val = bus->read(bus, phydev->addr, AT803X_DEBUG_DATA);
-+	if (val < 0) {
-+		val = 0xffff;
-+		goto out;
-+	}
-+
-+	val &= ~clear;
-+	val |= set;
-+	bus->write(bus, phydev->addr, AT803X_DEBUG_DATA, val);
-+
-+out:
-+	mutex_unlock(&bus->mdio_lock);
-+	return val;
-+}
-+
-+static inline void
-+at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set)
-+{
-+	at803x_dbg_reg_rmw(phydev, reg, 0, set);
-+}
-+
-+static inline void
-+at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear)
-+{
-+	at803x_dbg_reg_rmw(phydev, reg, clear, 0);
-+}
-+
-+
- /* save relevant PHY registers to private copy */
- static void at803x_context_save(struct phy_device *phydev,
- 				struct at803x_context *context)
-@@ -208,8 +256,16 @@ static int at803x_probe(struct phy_devic
- 	return 0;
- }
- 
-+static void at803x_disable_smarteee(struct phy_device *phydev)
-+{
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
-+		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
-+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-+}
-+
- static int at803x_config_init(struct phy_device *phydev)
- {
-+	struct at803x_platform_data *pdata;
- 	int ret;
- 
- 	ret = genphy_config_init(phydev);
-@@ -227,6 +283,26 @@ static int at803x_config_init(struct phy
- 			return ret;
- 	}
- 
-+	pdata = dev_get_platdata(&phydev->dev);
-+	if (pdata) {
-+		if (pdata->disable_smarteee)
-+			at803x_disable_smarteee(phydev);
-+
-+		if (pdata->enable_rgmii_rx_delay)
-+			at803x_dbg_reg_set(phydev, AT803X_DBG0_REG,
-+				AT803X_DEBUG_RGMII_RX_CLK_DLY);
-+		else
-+			at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG,
-+				AT803X_DEBUG_RGMII_RX_CLK_DLY);
-+
-+		if (pdata->enable_rgmii_tx_delay)
-+			at803x_dbg_reg_set(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
-+				AT803X_DEBUG_RGMII_TX_CLK_DLY);
-+		else
-+			at803x_dbg_reg_clr(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
-+				AT803X_DEBUG_RGMII_TX_CLK_DLY);
-+	}
-+
- 	return 0;
- }
- 
-@@ -258,6 +334,8 @@ static int at803x_config_intr(struct phy
- static void at803x_link_change_notify(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-+	struct at803x_platform_data *pdata;
-+	pdata = dev_get_platdata(&phydev->dev);
- 
- 	/*
- 	 * Conduct a hardware reset for AT8030 every time a link loss is
-@@ -288,6 +366,26 @@ static void at803x_link_change_notify(st
- 			priv->phy_reset = false;
- 		}
- 	}
-+	if (pdata && pdata->fixup_rgmii_tx_delay &&
-+	    phydev->speed != priv->prev_speed) {
-+		switch (phydev->speed) {
-+		case SPEED_10:
-+		case SPEED_100:
-+			at803x_dbg_reg_set(phydev,
-+				AT803X_DEBUG_SYSTEM_MODE_CTRL,
-+				AT803X_DEBUG_RGMII_TX_CLK_DLY);
-+			break;
-+		case SPEED_1000:
-+			at803x_dbg_reg_clr(phydev,
-+				AT803X_DEBUG_SYSTEM_MODE_CTRL,
-+				AT803X_DEBUG_RGMII_TX_CLK_DLY);
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		priv->prev_speed = phydev->speed;
-+	}
- }
- 
- static struct phy_driver at803x_driver[] = {
---- /dev/null
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -0,0 +1,11 @@
-+#ifndef _PHY_AT803X_PDATA_H
-+#define _PHY_AT803X_PDATA_H
-+
-+struct at803x_platform_data {
-+	int disable_smarteee:1;
-+	int enable_rgmii_tx_delay:1;
-+	int enable_rgmii_rx_delay:1;
-+	int fixup_rgmii_tx_delay:1;
-+};
-+
-+#endif /* _PHY_AT803X_PDATA_H */